Precision Digital PD6300-6R7 ProVu Pulse Input Flow Rate/Totalizer Digital Panel Meter, 4 relays/4 to 20 mA, VAC

The PD6300-6R7 is a UL 508 Listed digital panel meter specifically designed for displaying flow rate, total, and grand total from flowmeters with pulse outputs such Open Collector, NPN, PNP, TTL, Switch Contact, Sine Wave (Coil), or Square Wave. The inputs to the meter can be selected in the field by the user and the user can also easily scale the instrument to read in any engineering units desired. In addition, there is a multi-point linearization feature for customers that prefer more accuracy than the K-factor scaling can provide. The dual line, 6 digit display is great for displaying both flow rate and total at the same time. For instance, flow rate could be displayed on the upper display and flow total on the lower display. Or total on the top and grand total on the bottom. The flow rate totalizer can also be set up for non-resetable total. In addition, the high intensity display allows the instrument to be read in bright sunlight. This instrument can be easily programmed via the front panel buttons or with free PC-based software. The NEMA 4X front panel allows the instrument to be mounted in dirty and wet areas. The process meter is also available with an RS-485 Modbus interface. The PD6300 comes standard with a power supply for the flowmeter than can be set up in the field for 5, 10 or 24 VDC. The relays on this meter can be used for alarming or controlling purposes can be programmed for a variety of functions. The 4-20 mA output can be used to re-transmit the signal to another device and can operate on the rate, total or grand total. This allows the pulse input to the meter to be converted to an isolated 4-20 mA output.