MFPN45 Type Face Mill | KYOCERA | MISUMI

<ul><li>Economical double-sided 10-edge inserts</li><li>Reduced chattering with low cutting forces due to curved cutting edge design</li><li>Suppresses fracturing with dual angle edge design</li><li>Application: Facing, Chamfering</li><li>Compatible with (7) PNMU1205ANER…, PNEU1205ANER… style inserts</li></ul><p>Product Details:</p><ul><li>Cutter Style: MFPN</li><li>Hand of Holder: Right-Hand</li><li>Series: MFPN45</li><li>Lead Angle (Degree): 45</li><li>Bore Diameter: Metric</li><li>Cutter Pitch: Coarse Pitch</li><li>[DC] Cutting Diameter (mm): 125.00</li><li>[DCX] Maximum Cutting Diameter (mm): 138.00</li><li>[DCSFMS] Contact Surface Diameter Machine Side (mm): 138.00</li><li>[DCB] Connection Bore Diameter (mm): 40.00</li><li>[DCCB1] Connection Counterbore Diameter 1 (mm): 58.00</li><li>NONENONE</li><li>[LF] Functional Length (mm): 63.00</li><li>[CBDP] Connection Bore Depth (mm): 32.00</li><li>NONENONE</li><li>[KDP] Keyway Depth (mm): 9.00</li><li>[KWW] Keyway Width (mm): 16.40</li><li>[APMX] Maximum Depth of Cut (mm): 6.00 (GM/SM/GH), 5.00 (GL), 3.00 (W)</li><li>NONENONE</li><li>NONENONE</li><li>NONENONE</li><li>NONENONE</li><li>NONENONE</li><li>NONENONE</li><li>NONENONE</li><li>NONENONE</li><li>[A.R.] Axial Rake Angle (Degree): +10</li><li>[R.R.] Radial Rake Angle (Degree): -6</li><li>NONENONE</li><li>Number of Inserts: 7</li><li>Number of Flutes: 7</li><li>Number of Stages: 1</li><li>NONENONE</li><li>Multi-Use Tool: Yes</li><li>Coolant Through: No</li><li>Insert Holding Method: Screw</li><li>Toolholder Material: Steel</li><li>Application: Facing, Chamfering</li><li>Unit of Measure: Metric</li><li>Compatible Insert Hand: Right-Hand</li><li>Compatible Inserts (Partial): PNMU1205ANER…, PNEU1205ANER…</li></ul>MFPN Series Brochure