Omron E2E-X3D1-R 2M PROXIMITY SENSOR, INDUCTIVE, M12, SHIELDED, 3 MM, DC, 2-WIRE, NO | Kempston Controls

[Cylinder type sensing head size] M12 <br />[Type] Shielded <br />[Sensing method] Inductive type <br />[Sensing distance] 3mm -10% to +10% <br />[Setting distance] 0 to 2.4 mm <br />[Differential distance] 10% Max. of sensing distance <br />[Sensing object] Ferrous metal (Sensitivity lowers with non-ferrous metals.) <br />[Standard sensing object] Iron 12*12*1mm <br />[Response frequency] DC: 1 kHz (average) <br />[Power supply voltage] 12 to 24 VDC ripple(p-p) :10% Max. <br />[Operating voltage range] 10 to 30 VDC <br />[Leakage current] 0.8 mA Max. <br />[Control output (Output type)] DC 2-wire models with polarity <br />[Control output (Switching capacity)] 3 to 100mA <br />[Indicator] Operation indicator(red), Operation setting indicator(green) <br />[Operation mode] NO <br />[Protective circuit] Surge suppressor <br />Output short-cut protection <br />[Ambient temperature] Operating: -25 to 70 CEL <br />Storage: -40 to 85CEL <br />[Ambient humidity] 35 to 95 %RH(with no condensation) <br />[Voltage influence] +/- 1% Max. of sensing distance in rated voltage range +/- 15%. (As the basis for sensing distance at standard power voltage) <br />[Dielectric strength] 1000 VAC 50/60 Hz for 1 minute between charged parts and the case <br />[Degree of protection] IEC60529: IP67 <br />Company standard: Oil-proof <br />[Applicable standard (EC Directive (Low Voltage Directive) )] EN60947-1,EN60947-5-2 <br />[Applicable standard (EC Directive (EMC))] EMI: EN60947-5-2 <br />Emission Enclosure: CISPR11 Group 1 class A <br />EMS: EN60947-5-2 <br />Immunity ESD: IEC61000-4-2 <br />Immunity RF-interference: IEC61000-4-3 <br />Immunity Conducted Disturbance: IEC61000-4-6 <br />Immunity Burst: IEC61000-4-4 <br />CE marking: Equipped <br />[Connection method] Robot pre-wired models (Cable length: 2 m) <br />[Weight (Packed state)] approx. 70 g<br><br><br>(1)