As an Amazon Associate, we earn from qualifying purchases.

FCMR19-7-6-SS, 7mm x 6mm Six Beam Coupling, Stainless | Ruland

Ruland . FCMR19-7-6-SS

Gallery

Attributes

Brand name, Manufacturer name, BrandRuland
ManufacturerRuland Ruland Manufacturing Co., Inc.
Attribute007 mm
Attribute016 mm
Attribute02, Attribute0315.4 mm
Attribute0419.1 mm
Attribute05+0.025 mm / -0.000 mm
Attribute0631.8 mm
Attribute0722.33 mm
Attribute08+0.000 mm / -0.013 mm
Attribute09M3
Attribute10Alloy Steel with
Attribute112.5 mm
Attribute12Black Oxide
Attribute132.1 Nm
Attribute142 ea
Attribute150.88 Nm
Attribute163.0°
Attribute171.76 Nm
Attribute180.20 mm
Attribute193.51 Nm
Attribute200.13 mm
Attribute210.85 Deg/Nm
Attribute222.964 x10
Attribute236,000 RPM
Attribute24, Attribute25, Attribute26, Attribute27Yes
Attribute30Type 303 Austenitic, Non-Magnetic Bar
Attribute31-40°F to 350°F (-40°C to 176°C)
Attribute32Bright, No Plating
Attribute33Ruland Manufacturing
Attribute34USA
Attribute350.116000
Attribute36, UPC, EAN, EANList, UPCList634529043219
Attribute378483.60.8000
Attribute3831163003
Attribute39Torque ratings are at maximum misalignment.
Attribute40Performance ratings are for guidance only. The user must determine suitability for a particular application.
Attribute41Torque ratings for the couplings are based on the physical limitations/failure point of the machined beams. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the machined beams. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the machined beams. Please consult technical support for more assistance.
AttributeKey00Bore (B1)
AttributeKey01Small Bore (B2)
AttributeKey02B1 Max Shaft Penetration
AttributeKey03B2 Max Shaft Penetration
AttributeKey04Outer Diameter (OD)
AttributeKey05Bore Tolerance
AttributeKey06, length_AttribLength (L)
AttributeKey07, height_Attrib, width_AttribClearance Diameter (C) MAX
AttributeKey08Recommended Shaft Tolerance
AttributeKey09Cap Screw
AttributeKey10Screw Material
AttributeKey11Hex Wrench Size
AttributeKey12Screw Finish
AttributeKey13Seating Torque
AttributeKey14Number of Screws
AttributeKey15Dynamic Torque Reversing
AttributeKey16Angular Misalignment
AttributeKey17Dynamic Torque Non-Reversing
AttributeKey18Parallel Misalignment
AttributeKey19Static Torque
AttributeKey20Axial Motion
AttributeKey21Torsional Stiffness
AttributeKey22Moment of Inertia
AttributeKey23Maximum Speed
AttributeKey24Full Bearing Support Required?
AttributeKey25Nypatch? Anti-Vibration Hardware?
AttributeKey26Zero-Backlash?
AttributeKey27Balanced Design
AttributeKey28Torque Wrench
AttributeKey29Recommended Hex Key
AttributeKey30Material Specification
AttributeKey31Temperature
AttributeKey32Finish Specification
AttributeKey33Manufacturer
AttributeKey34Country of Origin
AttributeKey35, Weight_AttribWeight (lbs)
AttributeKey36UPC
AttributeKey37Tariff Code
AttributeKey38UNSPC
AttributeKey39Note 1
AttributeKey40Note 2
AttributeKey41Note 3
AttributeKey42Prop 65
DimensionUnitmm
Extra Product NameFCMR19-7-6-SS, 7mm x 6mm Six Beam Coupling, Stainless | Ruland
Weight0.116000 113.4
WeightUnitlbs
diameter, height, width22.33
keywordsFCMR19-7-6-SS, Beam Coupling, Six Beam Coupling
length31.8
moq, multiple, tierMinQty1, Case, Item_package_quantity, NumberOfItems, Number_of_items, PackageQuantity1
MPN, SKU, Part Number, Model, ModelNumber, Model_number, Mpns, PartNumber, Part_numberFCMR19-7-6-SS
qtyInStock0
snippetRuland part number FCMR19-7-6-SS is a 303 stainless steel six beam coupling with 7mm x 6mm bores. Download a 2D/3D CAD file or purchase the FCMR19-7-6-SS directly from the manufacturer.
tierMinQty220
tierMinQty360
tierMinQty4100
tierPrice1126.73
tierPrice2115.2
tierPrice396
tierPrice486.41
Product GroupBISS
ASINB016APP94A B08DLTNHYR
AdultProduct, Autographed, Memorabilia, TradeInEligibleFalse
AsinB016APP94A
BindingMisc.
Bullet_pointManufactured from 303 stainless steel for increased torque capacity Nypatch anti-vibration hardware prevents galling, maintains high holding power, and allows for multiple screw insertions.Hardware exceeds DIN 912 12.9 standards for maximum torque capabilities Ruland beam couplings are carefully made from select North American bar stock in our Marlborough, Massachusetts factory and are RoHS3 and REACH compliant Six beam couplings have higher torque and torsional stiffness than four and single beam couplings for use in light duty power transmission applications such as connecting a motor to a lead screw Zero-backlash and a balanced design for reduced vibration at speeds up to 6,000 RPM
CatIndustrial & Scientific
CatId16310091
CatTree16310091 16310161 16310181 16411711 16411721
ClassificationId16411731
DisplayNameBeam
Externally_assigned_product_identifier, Identifier00634529043219 0634529043219 634529043219
FeatureZero-backlash with a balanced design for reduced vibration in high speed applications
FetchTime1537732685 1572868360 1661100662 1677205704 1677540962 1678328722 1679910115 1679910646 1685527474 1685827534 1702191256
Height0.8 377 57 75 763
IdentifierTypeEAN GTIN UPC
IsBrandQueryTrue
ItemClassificationBASE_PRODUCT
ItemName, Item_name, TitleRuland FCMR19-7-6-SS 303 Stainless Steel Beam Coupling, 6-Beam Clamp Style, 7 mm x 6 mm Bores, 19.1 mm OD, 31.8 mm Length
Item_package_weight113.4
Item_type_keywordbeam-couplings
KeywordFCMR19-6-6-A
Label, Man, Publisher, StudioRuland Manufacturing Co., Inc.
Length5 5.0
Linkhttps://m.media-amazon.com/images/I/412hl93RUdL._SL75_.jpg https://m.media-amazon.com/images/I/412hl93RUdL.jpg https://m.media-amazon.com/images/I/61jcoes+0OL.jpg
Marketplace_idATVPDKIKX0DER
Material, MaterialType303 Stainless Steel
ParentAsinsB08DLTNHYR
ProductGroupBISS BISS Basic
ProductType, ProductTypeNameBEARINGS_AND_BUSHINGS
Product_site_launch_date2015-10-06T08:00:01.000Z
ReleaseDate2017-03-12
SkuFCMR19-7-6-SS RULAND FCMR19-6-6-A RULAND FCMR19-6-6-SS RULAND FCMR19-7-6-SS RULAND FCMR19-7-7-SS RULAND MANUFACTURING FCMR19-6-6-SS RULAND MANUFACTURING FCMR19-7-6-SS RULAND MANUFACTURING FCMR19-7-7-SS
Street_date2017-03-12T00:00:01Z
String_value31.8 7 x 6
StrippedMpnsFCMR1976SS
TypeVARIATION ean gtin upc
URLhttp://ecx.images-amazon.com/images/I/51WItJ2GYGL._SL75_.jpg https://m.media-amazon.com/images/I/412hl93RUdL._SL75_.jpg
Unitinches millimeters pounds
Unitsinches pixels pounds
VariantMAIN
WebsiteDisplayGroupbiss_basic_display_on_website
WebsiteDisplayGroupNameBISS Basic
Width1011 3 3.0 500 75

Distributor offers

SellerSKUMOQIn stockMultiplePrices
RulandFCMR19-7-6-SS111 @ $126.73, 20 @ $115.20, 60 @ $96.00, 100 @ $86.41
Raptor SuppliesAF9UBR111 @ $221.92
cbtcompany.comFCMR19-7-6-SS11
Digi-Key1361613311
ZoroG7828003111 @ $104.00
sustainablesupply.comC16447201-211 @ $182.26
motionindustries.com048046531Not in Stock, Available to Order11 @ $110.93
Grainger30UR771-211 @ $196.00

Related on Amazon

As an Amazon Associate, we earn from qualifying purchases. (paid link) CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Ruland FCMR19-7-6-SS 303 Stainless Steel Beam Coupling, 6-Beam Clamp Style, 7 mm x 6 mm Bores, 19.1 mm OD, 31.8 mm Length
Brand: Ruland
Details
  • Six beam couplings have higher torque and torsional stiffness than four and single beam couplings for use in light duty power transmission applications such as connecting a motor to a lead screw
  • Zero-backlash and a balanced design for reduced vibration at speeds up to 6,000 RPM
  • Manufactured from 303 stainless steel for increased torque capacity
  • Nypatch anti-vibration hardware prevents galling, maintains high holding power, and allows for multiple screw insertions.Hardware exceeds DIN 912 12.9 standards for maximum torque capabilities
  • Ruland beam couplings are carefully made from select North American bar stock in our Marlborough, Massachusetts factory and are RoHS3 and REACH compliant
Listing
BindingMisc.
Product groupBISS
Product typeBEARINGS_AND_BUSHINGS
ModelFCMR19-7-6-SS
Part numberFCMR19-7-6-SS
Items per pack1
LabelRuland Manufacturing Co., Inc.
ManufacturerRuland Manufacturing Co., Inc.
Catalog
FeatureZero-backlash with a balanced design for reduced vibration in high speed applications
CategoryIndustrial & Scientific
MPNFCMR19-7-6-SS
UPC634529043219
EAN634529043219
Product groupBISS
Product typeBEARINGS_AND_BUSHINGS
ManufacturerRuland Manufacturing Co., Inc.
View on Amazon (paid link)