Seco-Larm Wireless Video Door Phone - DP-266-1C3Q

<p><b>Seco-Larm DP-266-1C3Q ENFORCER Wireless Video Door Phone, Full Duplex Voice Communication, Unlocks Doors or Gates Via The Monitor, 480 TV Lines, IR Enabled for Nightime Operation</b></p> <p>The ENFORCER Wireless Video Door Phone is a stand-alone, handheld home entry solution. Observe visitors on the large 3 3/8" screen as they arrive, communicate with them, take photos for later viewing, and unlock a gate to grant entry – all from the wireless monitor. Connect up to 3 monitors with 2 cameras for viewing multiple entrances around the house</p> <b>Key Features</b> <ul> <li>Talk with visitors and unlock doors or gates via the monitor</li> <li>Handheld monitor's rechargeable battery allows convenient communication with visitors while moving around the premises</li> <li>Connect up to 2 additional monitors and 1 additional camera (sold separately) </li> <li>Intercom calling between paired monitors</li> <li>Egress input allows the door phone to be connected to a Request-to-Exit Plate or other egress device </li> <li>Camera has a 170° field of view with adjustable pan and tilt angle to accommodate a variety of installations</li> <li>Camera has built-in IR LEDs for nighttime operation</li> <li>Camera's built-in PIR sensor activates camera to take photos of approaching visitors</li> <li>Tamper switch triggers alarm if camera is removed from base</li> </ul> <b>Specifications</b> <ul> <li>Camera Type: Color Camera</li> <li>Chip: CMOS Sensor</li> <li>Resolution: 480 TV Lines</li> <li>Lens: 2mm</li> <li>Field of View: 170 Degrees</li> <li>Camera Operating Voltage: 9-16 VAC / 5-16 VDC</li> <li>Relock Delay: 3/6/8 Seconds</li> <li>Camera Dimmensions: 6" x 3.2" x 1.9"</li> <li>Monitor Display: 3 3/8 "</li> <li>Monitor Operating Voltage: 5VDC (Adapter) or 3.7 VDC (Battery)</li> <li>Operating Frequency: 2402 - 2480 MHz</li> <li>RF Power: 120 mW</li> <li>Monitor Dimmensions: 5" x 3.3" x 0.9"</li> </ul>

Seco-Larm DP-266-1C3Q ENFORCER Wireless Video Door Phone, Full Duplex Voice Communication, Unlocks Doors or Gates Via The Monitor, 480 TV Lines, IR Enabled for Nightime Operation<br><br> The ENFORCER Wireless Video Door Phone is a stand-alone, handheld home entry solution. Observe visitors on the large 3 3/8" screen as they arrive, communicate with them, take photos for later viewing, and unlock a gate to grant entry – all from the wireless monitor. Connect up to 3 monitors with 2 cameras for viewing multiple entrances around the house<br><br> Key Features<br> - Talk with visitors and unlock doors or gates via the monitor<br> - Handheld monitor's rechargeable battery allows convenient communication with visitors while moving around the premises<br> - Connect up to 2 additional monitors and 1 additional camera (sold separately) <br> - Intercom calling between paired monitors<br> - Egress input allows the door phone to be connected to a Request-to-Exit Plate or other egress device <br> - Camera has a 170° field of view with adjustable pan and tilt angle to accommodate a variety of installations<br> - Camera has built-in IR LEDs for nighttime operation<br> - Camera's built-in PIR sensor activates camera to take photos of approaching visitors<br> - Tamper switch triggers alarm if camera is removed from base<br><br> Specifications<br> - Camera Type: Color Camera<br> - Chip: CMOS Sensor<br> - Resolution: 480 TV Lines<br> - Lens: 2mm<br> - Field of View: 170 Degrees<br> - Camera Operating Voltage: 9-16 VAC / 5-16 VDC<br> - Relock Delay: 3/6/8 Seconds<br> - Camera Dimmensions: 6" x 3.2" x 1.9"<br> - Monitor Display: 3 3/8 "<br> - Monitor Operating Voltage: 5VDC (Adapter) or 3.7 VDC (Battery)<br> - Operating Frequency: 2402 - 2480 MHz<br> - RF Power: 120 mW<br> - Monitor Dimmensions: 5" x 3.3" x 0.9"<br><br>