As an Amazon Associate, we earn from qualifying purchases.

Order 2721208CBC by Dixon Valve Male NPT x Push-On Hose Barb - US Mega Store

Gallery

Attributes

Brand name, Manufacturer name, ManufacturerDixon Valve
Attribute00, Attribute09Brass
Attribute01, Attribute10Brass Cap
Attribute02, Attribute11NPTF
Attribute03, Attribute121/2"-14
Attribute04, Attribute133/4"
Attribute05, Attribute147/8"
Attribute06, Attribute152.55"
Attribute07, Attribute163
Attribute08, Attribute171.50"
AttributeKey00, AttributeKey09Material
AttributeKey01, AttributeKey10Component Material
AttributeKey02, AttributeKey11Male Thread
AttributeKey03, AttributeKey12Male Thread Size
AttributeKey04, AttributeKey13Hose ID
AttributeKey05, AttributeKey14Hex
AttributeKey06, AttributeKey15, length_AttribLength
AttributeKey07, AttributeKey16Number of Barbs
AttributeKey08, AttributeKey17Barb Length
CategoryL1Plumbing
CategoryL2Fittings
CategoryL3Barb
CategoryL4Dixon Valve 2721208CBC
ConditionNEW
DimensionUnitinch
Extra Product NameOrder 2721208CBC by Dixon Valve Male NPT x Push-On Hose Barb - US Mega Store
length2.55
moq, multiple, tierMinQty11
MPN, SKU2721208CBC
qtyInStock-2
qtySourceFieldMap
snippet<p><strong>Dixon, 2721208CBC, 3/4in Hose ID x 1/2in-14 Male NPT x Push-On Hose Barb, Brass Cap </strong> </p> <p><strong>Construction </strong> </p> <ul><li>Dryseal </li> </ul> <p><strong>Installation </strong> </p> <ul><li>Assembly Instructions: </li> <li>1. Trim hose end with smooth square cut. </li> <li>2. Lubricate either push-on fitting, hose or both. </li> <li>3. Insert push-on fitting into hose until first barb is in hose. </li> <li>4. Place end of fitting against a flat object (bench, wall, etc.) and grip the hose one inch from end. Push with a steady force until end of hose is covered by yellow plastic cap. </li> </ul> <p><strong>Instructions </strong> </p> <ul><li>Disassembly instructions: </li> <li>1. Leaving push-on fitting in place, make a 1in cut in the hose along the barbed end of the fitting. Note: Be careful not to nick barbs when cutting the hose. </li> <li>2. With firm grip on hose, give a sharp downward pull to release the fitting from the hose. </li> </ul> <p><strong>Note </strong> </p> <ul><li>No hose clamps or ferrules are needed </li> </ul> <p><strong>Safety notes </strong> </p> <ul><li>Dixon push-on fittings are intended for use with Lok-On (push-on style) hose only. </li> <li>Caution: Push-on fittings will properly grip push-on hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap. </li> <li>WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling. </li> </ul>
tierPrice19.08

Distributor offers

SellerSKUMOQIn stockMultiplePrices
usmegastore.com2721208CBC1-211 @ $9.08
Wilson2721208CBC111 @ $22.45
heavydutydepot.com2721208CBC12-211 @ $9.08
MRO Supply2932633111 @ $8.91
Megadepot2721208CBC111 @ $9.08
Radwell2721208CBC11
AmazonSCB06Y17PC6811