SECO-LARM . E-9679-8B190Q

<p><b>Seco-Larm E-9679-8B190Q Indoor/Outdoor Long Range Barrier Sensor, 8 Pairs of Beams, Up to 190ft (60m) Outdoor Range, NO or NC Alarm Output, Adjustable Interruption Time, 1 Amp Relay Output</b></p> <b>Key Features</b><ul> <li>For indoor or outdoor perimeter security</li> <li>Long sensor range up to 190ft (60m) outdoors, 380ft (120m) indoors</li> <li>Heater for use in cold weather operation</li> <li>Heater activates at 41ºF (5ºC)</li> <li>Terminal block wiring</li> <li>Rugged aluminum construction</li> <li>No synchronizing wires required to align the beams</li> <li>Form C relay output</li> <li>LED and buzzer alignment indicators</li> <li>Programmable for 4 different frequencies to reduce interference between multiple units</li></ul> <b>Specifications</b><ul> <li>Number of Beams: 8 pairs</li> <li>Buzzer Active Current: 20mA@12VDC (RX)</li> <li>Heater Active Current: 160mA@12VDC</li> <li>Rx Standby Current: (Buzzer off) 108mA, Heater off,+/-25%@12VDC</li> <li>Rx Trigger Current: (Buzzer on) 108mA, Heater off,+/-25%@12VDC</li> <li>Tx Standby & Active Current: 109mA, Heater off, +/-25%@12VDC</li> <li>Input voltage: 12~24 VDC</li> <li>Operating Voltage: 12~24VDC</li> <li>Reaction time: 150/300/450/600 ms (DIP switch programmable)</li> <li>LEDs - Red: Alignment LED (Rx only), ON - beam is broken / OFF - aligned</li> <li>Detection System: Triggers as programmed when any 2 adjacent pair of beams are broken, or any single pair of beams is broken for over 2 sec. (programmable by JP2)</li> <li>Alarm Output: NO/NC/COM, relay output, active for 1 sec. when triggered</li> <li>Tamper Output: 1A@120VAC / 1A@24VDC (Tx & Rx)</li> <li>Case material: Aluminum housing / PC anti-UV cover / ABS end caps</li> <li>Operating Humidity: 0~95%</li> <li>Operating Temperature: -49º~131ºF</li> <li>Enclosure: IP65</li> <li>Length: 79"</li> <li>Alignment Angle: Horizontal +/-90º</li> <li>Dimensions: 1-7/8" x 2-1/4"</li> <li>Weight: 14.3-lb</li></ul>