As an Amazon Associate, we earn from qualifying purchases.

MDSS57-25-24-A, 25mm x 24mm Single Disc Coupling, Aluminum | Ruland

Gallery

Attributes

Brand name, Manufacturer name, ManufacturerRuland
Attribute0025 mm
Attribute0124 mm
Attribute02, Attribute0327.6 mm
Attribute0457.2 mm
Attribute05+0.03 mm / -0.00 mm
Attribute0658.8 mm
Attribute0726.67 mm
Attribute08+0.000 mm / -0.013 mm
Attribute09M8
Attribute10Alloy Steel
Attribute114.0 mm
Attribute12Black Oxide
Attribute1317 Nm
Attribute144 ea
Attribute1512.73 Nm
Attribute161.0°
Attribute1725.45 Nm
Attribute180.00 mm
Attribute1950.9 Nm
Attribute200.38 mm
Attribute21113.0 Nm/Deg
Attribute2210,000 RPM
Attribute23Yes
Attribute24Hubs: 2024-T351 Aluminum Bar, Disc Springs: Type 302 Stainless Steel
Attribute25-40°F to 200°F (-40°C to 93°C)
Attribute26Sulfuric Anodized MIL-A-8625 Type II, Class 2 and ASTM B580 Type B Black Anodize
Attribute27Ruland Manufacturing
Attribute28, countryOfOriginUSA
Attribute29, Weight0.731000
Attribute30, UPC634529163788
Attribute318483.60.8000
Attribute3231163008
Attribute33This product has been discontinued as a standard item. Please inquire for special pricing.
Attribute34Torque ratings are at maximum misalignment.
Attribute35Performance ratings are for guidance only. The user must determine suitability for a particular application.
Attribute36Torque ratings for the couplings are based on the physical limitations/failure point of the disc springs. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the disc springs. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the disc springs. Keyways are available to provide additional torque capacity in the shaft/hub connection when required. Please consult technical support for more assistance.
AttributeKey00Bore (B1)
AttributeKey01Small Bore (B2)
AttributeKey02B1 Max Shaft Penetration
AttributeKey03B2 Max Shaft Penetration
AttributeKey04, height_AttribOuter Diameter (OD)
AttributeKey05Bore Tolerance
AttributeKey06, length_AttribLength (L)
AttributeKey07, width_AttribHub Width (LH)
AttributeKey08Recommended Shaft Tolerance
AttributeKey09Forged Set Screw
AttributeKey10Screw Material
AttributeKey11Hex Wrench Size
AttributeKey12Screw Finish
AttributeKey13Seating Torque
AttributeKey14Number of Screws
AttributeKey15Dynamic Torque Reversing
AttributeKey16Angular Misalignment
AttributeKey17Dynamic Torque Non-Reversing
AttributeKey18Parallel Misalignment
AttributeKey19Static Torque
AttributeKey20Axial Motion
AttributeKey21Torsional Stiffness
AttributeKey22Maximum Speed
AttributeKey23Full Bearing Support Required?
AttributeKey24Material Specification
AttributeKey25Temperature
AttributeKey26Finish Specification
AttributeKey27Manufacturer
AttributeKey28Country of Origin
AttributeKey29, Weight_AttribWeight (lbs)
AttributeKey30UPC
AttributeKey31Tariff Code
AttributeKey32UNSPC
AttributeKey33Note 1
AttributeKey34Note 2
AttributeKey35Note 3
AttributeKey36Note 4
AttributeKey37Prop 65
DimensionUnitmm
Extra Product NameMDSS57-25-24-A, 25mm x 24mm Single Disc Coupling, Aluminum | Ruland
WeightUnitlbs
diameter, height57.2
keywordsMDSS57-25-24-A, Single Disc Coupling
length58.8
moq, multiple, tierMinQty11
MPN, SKUMDSS57-25-24-A
qtyInStock0
snippetRuland part number MDSS57-25-24-A is an aluminum single disc coupling with 25mm x 24mm bores. Download a 2D/3D CAD file or purchase the MDSS57-25-24-A directly from the manufacturer.
tierMinQty210
tierMinQty325
tierMinQty450
tierPrice1285.59
tierPrice2214.19
tierPrice3159.93
tierPrice496.03
width26.67

Distributor offers

SellerSKUMOQIn stockMultiplePrices
RulandMDSS57-25-24-A111 @ $285.59, 10 @ $214.19, 25 @ $159.93, 50 @ $96.03
cbtcompany.comMDSS57-25-24-A11
Digi-Key13610631111 @ $285.59
motionindustries.com06260144111 @ $490.89