As an Amazon Associate, we earn from qualifying purchases.

MWC30-12-11-A, 12mm x 11mm Four Beam Coupling, Aluminum | Ruland

Ruland . MWC30-12-11-A

Gallery

Attributes

Brand name, Manufacturer name, BrandRuland
ManufacturerRuland Ruland Manufacturing Ruland Manufacturing Co., Inc.
Attribute0012 mm
Attribute0111 mm
Attribute02, Attribute0318.2 mm
Attribute0430.0 mm
Attribute05+0.025 mm / -0.000 mm
Attribute0638.0 mm
Attribute07+0.000 mm / -0.013 mm
Attribute08M4
Attribute09Alloy Steel
Attribute103.0 mm
Attribute11Black Oxide
Attribute124.6 Nm
Attribute132 ea
Attribute141.65 Nm
Attribute153.0°
Attribute163.30 Nm
Attribute170.38 mm
Attribute186.60 Nm
Attribute190.25 mm
Attribute200.93 Deg/Nm
Attribute217.958 x10
Attribute226,000 RPM
Attribute23, Attribute24, Attribute25Yes
Attribute287075-T651 Extruded and Drawn Aluminum Bar
Attribute29-40°F to 225°F (-40°C to 107°C)
Attribute30Bright, No Plating
Attribute31Ruland Manufacturing
Attribute32USA
Attribute330.123500
Attribute34, UPC, EAN, EANList, UPCList634529212684
Attribute358483.60.8000
Attribute3631163003
Attribute37Torque ratings are at maximum misalignment.
Attribute38Performance ratings are for guidance only. The user must determine suitability for a particular application.
Attribute39Torque ratings for the couplings are based on the physical limitations/failure point of the machined beams. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the machined beams. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the machined beams. Please consult technical support for more assistance.
AttributeKey00Bore (B1)
AttributeKey01Small Bore (B2)
AttributeKey02B1 Max Shaft Penetration
AttributeKey03B2 Max Shaft Penetration
AttributeKey04, height_Attrib, width_AttribOuter Diameter (OD)
AttributeKey05Bore Tolerance
AttributeKey06, length_AttribLength (L)
AttributeKey07Recommended Shaft Tolerance
AttributeKey08Cap Screw
AttributeKey09Screw Material
AttributeKey10Hex Wrench Size
AttributeKey11Screw Finish
AttributeKey12Seating Torque
AttributeKey13Number of Screws
AttributeKey14Dynamic Torque Reversing
AttributeKey15Angular Misalignment
AttributeKey16Dynamic Torque Non-Reversing
AttributeKey17Parallel Misalignment
AttributeKey18Static Torque
AttributeKey19Axial Motion
AttributeKey20Torsional Stiffness
AttributeKey21Moment of Inertia
AttributeKey22Maximum Speed
AttributeKey23Full Bearing Support Required?
AttributeKey24Zero-Backlash?
AttributeKey25Balanced Design
AttributeKey26Torque Wrench
AttributeKey27Recommended Hex Key
AttributeKey28Material Specification
AttributeKey29Temperature
AttributeKey30Finish Specification
AttributeKey31Manufacturer
AttributeKey32Country of Origin
AttributeKey33, Weight_AttribWeight (lbs)
AttributeKey34UPC
AttributeKey35Tariff Code
AttributeKey36UNSPC
AttributeKey37Note 1
AttributeKey38Note 2
AttributeKey39Note 3
AttributeKey40Prop 65
DimensionUnitmm
Extra Product NameMWC30-12-11-A, 12mm x 11mm Four Beam Coupling, Aluminum | Ruland
Weight0.123500 77.11
WeightUnitlbs
diameter, height, width30.0
keywordsMWC30-12-11-A, Beam Coupling, Four Beam Coupling
length38.0
moq, multiple, tierMinQty1, Case, Item_package_quantity, NumberOfItems, Number_of_items, PackageQuantity1
MPN, SKU, Part Number, Model, Keyword, ModelNumber, Model_number, PartNumber, Part_numberMWC30-12-11-A
qtyInStock-2
qtySourceFieldMap
snippetRuland part number MWC30-12-11-A is an aluminum four beam coupling with 12mm x 11mm bores. Download a 2D/3D CAD file or purchase the MWC30-12-11-A directly from the manufacturer.
tierMinQty210
tierMinQty325
tierMinQty450
tierPrice184.94
tierPrice277.22
tierPrice364.36
tierPrice457.92
Product GroupBISS
ASIN, AsinB016APQ5YS
AdultProduct, Autographed, Memorabilia, TradeInEligibleFalse
BindingMisc.
Bullet_pointFour beam couplings have higher torque and torsional stiffness than commodity style single beam couplings and are ideal for encoder, tachometer, and other light duty applications. Hardware exceeds DIN 912 12.9 standards for maximum torque capabilities. Ruland beam couplings are carefully made from select North American bar stock in our Marlborough, Massachusetts factory and are RoHS3 and REACH compliant. Manufactured from 7075 aluminum for light weight and low inertia. Smaller bodies than six beam couplings allow them to fit in confined spaces. Zero-backlash and a balanced design for reduced vibration at speeds up to 6,000 RPM.
CatIndustrial & Scientific
CatId16310091
CatTree16310091 16310161 16310181 16411711 16411721
ClassificationId16411731
DisplayNameBeam
Externally_assigned_product_identifier, Identifier00634529212684 0634529212684 634529212684
FeatureZero-backlash with a balanced design for reduced vibration in high speed applications
FetchTime1628067683 1651823008 1663661731 1677654318 1714684741
Height1.1 1000 500 75
IdentifierTypeEAN GTIN UPC
IsBrandQueryTrue
ItemClassificationBASE_PRODUCT
ItemName, Item_name, TitleRuland MWC30-12-11-A 7075 Aluminum Beam Coupling, 4-Beam Clamp Style, 12 mm x 11 mm Bores, 30.0 mm OD, 38.0 mm Length
Item_package_weight77.11
Item_type_keywordbeam-couplings
Label, Publisher, StudioRuland Manufacturing Ruland Manufacturing Co., Inc.
Length6 6.0
Linkhttps://m.media-amazon.com/images/I/51LiWOAom1L._SL75_.jpg https://m.media-amazon.com/images/I/51LiWOAom1L.jpg https://m.media-amazon.com/images/I/61EjB4cXpzL.jpg
ManRuland Manufacturing Co., Inc.
Marketplace_idATVPDKIKX0DER
Material, MaterialType7075 Aluminum
ProductGroupBISS BISS Basic
ProductType, ProductTypeNameBEARINGS_AND_BUSHINGS
Product_site_launch_date2015-10-06T08:00:01.000Z
SkuRULAND MANUFACTURING MWC30-12-12-A RULAND MWC30-12-12-A
String_value12 x 11 38.0
Typeean gtin upc
URLhttps://m.media-amazon.com/images/I/51LiWOAom1L._SL75_.jpg
Unitinches millimeters pounds
Unitsinches pixels pounds
VariantMAIN
WebsiteDisplayGroupbiss_basic_display_on_website
WebsiteDisplayGroupNameBISS Basic
Width1000 4 4.0 500 75

Distributor offers

SellerSKUMOQIn stockMultiplePrices
RulandMWC30-12-11-A1-211 @ $84.94, 10 @ $77.22, 25 @ $64.36, 50 @ $57.92
Raptor SuppliesAF9VDM111 @ $153.78
cbtcompany.comMWC30-12-11-A111 @ $74.03
ZoroG8308876111 @ $69.00
Digi-Key136136551101
motionindustries.com06266272111 @ $114.08
sustainablesupply.comC16452711-211 @ $131.77
AmazonB016APQ5YS11
Grainger30UY34111 @ $98.95

Related on Amazon

As an Amazon Associate, we earn from qualifying purchases. (paid link) CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Ruland MWC30-12-11-A 7075 Aluminum Beam Coupling, 4-Beam Clamp Style, 12 mm x 11 mm Bores, 30.0 mm OD, 38.0 mm Length
Brand: Ruland
Details
  • Four beam couplings have higher torque and torsional stiffness than commodity style single beam couplings and are ideal for encoder, tachometer, and other light duty applications.
  • Smaller bodies than six beam couplings allow them to fit in confined spaces.
  • Zero-backlash and a balanced design for reduced vibration at speeds up to 6,000 RPM.
  • Manufactured from 7075 aluminum for light weight and low inertia.
  • Hardware exceeds DIN 912 12.9 standards for maximum torque capabilities. Ruland beam couplings are carefully made from select North American bar stock in our Marlborough, Massachusetts factory and are RoHS3 and REACH compliant.
Listing
BindingMisc.
Product groupBISS Basic
Product typeBEARINGS_AND_BUSHINGS
ModelMWC30-12-11-A
Part numberMWC30-12-11-A
Items per pack1
LabelRuland Manufacturing
ManufacturerRuland Manufacturing
Catalog
FeatureZero-backlash with a balanced design for reduced vibration in high speed applications
CategoryIndustrial & Scientific
MPNMWC30-12-11-A
UPC634529212684
EAN634529212684
Product groupBISS
Product typeBEARINGS_AND_BUSHINGS
ManufacturerRuland Manufacturing Co., Inc.
View on Amazon (paid link)