Omron Industrial Automation Inductive Proximity Sensor - E2E-X2E1-M1

'Cylindrical Proximity Sensor, Inductive, 12.0mm, Proximity Sensor Power Requirement 10 to 30VDC, Shielded, Proximity Sensor Operating Frequency 1500 Hz, Proximity Sensor Output Circuit Type 3 Wire NPN, Max. Detecting Distance 2.0mm, Proximity Sensor Electrical Connection 4 Pin M12 Connector, Output Mode NO, NEMA Rating 4X, IP Rating 67, Case Material Nickel Plated Brass, Length 41mm, Operating Temp. Range -40 Degrees to 185 Degrees F, Max. Current Load 200mA'

[Cylinder type sensing head size] M12 <br>[Type] Shielded <br>[Sensing method] Inductive type <br>[Sensing distance] 2mm -10% to +10% <br>[Setting distance] 0 to 1.6 mm <br>[Differential distance] 10% Max. of sensing distance <br>[Detectable object] Ferrous metal(The sensing distance decreases with non-ferrous metal.) <br>[Standard sensing object] Iron 12*12*1mm <br>[Response frequency] 1.5 kHz(average) <br>[Power supply voltage] 12 to 24 VDC,ripple(p-p):10% Max. <br>[Operating voltage range] 10 to 40 VDC <br>[Current consumption] 13 mA Max. <br> [Control output(Residual voltage)] 2 V Max.(Load current: 200 mA, Cable length: 2 m) <br>[Operation mode] NO <br>[Protective circuit] Load short-circuit protection, Surge suppressor, Reverse polarity protection <br>[Ambient temperature] Operating:-40 to 85 CEL(with no icing or condensation) <br>[Ambient humidity range] Operating/Storage: 35% to 95% (with no condensation) <br>[Temperature influence] +/- 10% Max. of sensing distance in temperature range of -25 to +70 CEL,+/- 15% Max. of sensing distance in temperature range of -40 to +85 CEL(As the basis for sensing distance of 23CEL) <br>[Voltage influence] +/- 1% Max. of sensing distance in rated voltage range +/- 15%.(As the basis for sensing distance at standard power voltage) <br>[Degree of protection] IEC60529 IP67 <br>[Applicable standard(EC Directive(Low Voltage Directive))] EN60947-1,EN60947-5-2 <br>[Connection method] M12 connector models <br>[Weight(Packed state)] approx. 25 g<br><br><br>(1)