Omron Automation . EESPW321

Optical Switches, Transmissive, Phototransistor Output TRANS 30cm SNS DIST

[Luminous method] Modulated <br>[Sensing method] Through-beam type <br>[Sensing distance] 0 to 300 mm <br>[Operation mode] Dark-ON <br>[Standard sensing object] 2 mm dia. min.: Opaque <br>(Detection of objects up to 0.5 mm wide is possible by using slit installation.) <br>[Directional angle] 10 to 40 deg. <br>[Light source] GaAs infrared LED (pulse lighting) <br>[Indicator] Light indicator (red LEDs on Sensor and Amplifier) <br>[Power supply voltage] 12 to 24 VDC (-10% to 10%) (ripple (p-p): 5% max.) <br>[Current consumption] Average: 30 mA max. <br>[Control output] Output type: NPNopen collector <br>Load current: 100 mA max. <br>Residual voltage: 1 V max. (at 100 mA load current) <br>[Response time] 1 ms max. for both detection and reset <br>[Illumination on the surface receiver] 3000 lx max. (incandescent light) <br>10000 lx max. (sunlight) <br>[Ambient temperature] -20 to +55 CEL(with no icing or condensation) <br>[Ambient humidity] 5 to 85% RH(with no icing or condensation) <br>[Vibration resistance] 10 to 55 Hz, 1.5 mm double amplitude for 2 h <br>[Shock resistance] 500 m/s**2 <br>[Degree of protection] IP64 <br>[Connection method] Pre-wired <br>[Cable length] 2 m (Cable length from emitter to amplifier: 0.5 m) <br>[Weight] Package: Approx. 76 g <br>[Material] Case: ABS resin <br>Lens: Acrylate resin <br>[Accessories] Slits: 0.5 x 3 mm, 1 x 3 mm, 3 x 0.5 mm, 3 x 1 mm (one each) <br>Sems screws with spring washers and flat washers: Six M2.6 x 12 <br>Instruction Manual<br><br><br>(1)