Tripp-Lite P166-001-A | HDMI Display-Side Wallplate with Act

Tripp Lite's P166-001-A HDMI Display-side Wallplate with Signal Booster increases the distance a 1080p (24Hz) signal can be transmitted beyond the recommended 16 ft. (5 m.). It supports video resolutions up to 1080p, and a maximum distance of 150 ft. from the source. Use P568-Series HDMI cables in most applications. When extending a 1080p (24Hz) signal more than 75 ft., use cable made with 24Awg wiring, such as the P568-100-HD. (Lengths over 100 ft. are available from Tripp Lite as a custom order) 24Awg HDMI cable is also needed when extending a 3D signal more than 50 ft.. A 3D signal can be extended up to 125 ft. using 24Awg HDMI cable. Simply connect the longer cable between the source and the P166-001-A, and the shorter cable (16 ft. or less) between the adapter and the monitor. Software or drivers are not required. HDCP compliant.Package Includes: HDMI Display-side Wallplate w/Signal Booster

With Tripp Lites HDMI Display-side Wallplate w/Signal Booster you can now hide that HDMI cable thats connected to the Flat Screen HDTV hanging on the wall by running the cable behind the wall and into the back of the faceplate. The built-in signal booster allows the video source (DVR SAT box etc.) to be located up to 150ft from the monitor. Where distance limitation is not an issue see Tripp Lites Passive Feed-Through Wallplate P166-001-P. Also known as -Lite 2 Socket HDMI Display-Side Faceplate With Signal Booster-HDMI Display-side Wallplate with Active Signal Booster (F/F)-Tripp Lite HDMI Display-side Wallplate with Active Signal Booster (F/F) (P166-00-Tripp Lite Lite 2 Socket HDMI Display-Side Faceplate With Signal Booster-Tripp Lite HDMI Display-side Wallplate with Active Signal Booster (F/F)