As an Amazon Associate, we earn from qualifying purchases.

Ruland . PSR20-1/4"-6MM-A

Ruland . PSR20-1/4"-6MM-A

Attributes

Brand name, Manufacturer name, ManufacturerRuland
Attribute000.250 in
Attribute016 mm
Attribute02, Attribute030.695 in, 17.6 mm
Attribute041.250 in, 31.8 mm
Attribute05+.001 in / -.000 in, +.025 mm / -.000 mm
Attribute061.500 in / 38.1 mm
Attribute07M6
Attribute08Alloy Steel
Attribute093.0 mm
Attribute10Black Oxide
Attribute117.2 Nm
Attribute124 ea
Attribute1368 lb-in, 7.68 Nm
Attribute143°
Attribute1534 lb-in, 3.84 Nm
Attribute160.015 in, 0.38 mm
Attribute1717 lb-in, 1.92 Nm
Attribute180.010 in, 0.25 mm
Attribute190.060 Deg/lb-in, 0.53 Deg/Nm
Attribute200.0340 lb-in
Attribute216,000 RPM
Attribute227075-T651 Extruded and Drawn Aluminum Bar
Attribute23-40°F to 225°F
Attribute24Bright
Attribute25Ruland Manufacturing
Attribute26USA
Attribute270.2170
Attribute2863452919889
Attribute29Torque ratings are at maximum misalignment.
Attribute30Performance ratings are for guidance only. The user must determine suitability for a particular application.
Attribute31Torque ratings for the couplings are based on the physical limitations/failure point of the machined beams. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the machined beams. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the machined beams. Keyways are available to provide additional torque capacity in the shaft/hub connection when required. Please consult technical support for more assistance.
AttributeKey00Large Bore B1
AttributeKey01Small Bore B2
AttributeKey02B1 Shaft Penetration
AttributeKey03B2 Shaft Penetration
AttributeKey04Outer Diameter OD
AttributeKey05Bore Tolerance
AttributeKey06Length L
AttributeKey07Forged Set Screw
AttributeKey08Screw Material
AttributeKey09Hex Wrench Size
AttributeKey10Screw Finish
AttributeKey11Seating Torque
AttributeKey12Number of Screws
AttributeKey13Static Torque
AttributeKey14Angular Misalignment
AttributeKey15Dynamic Torque Non-Reversing
AttributeKey16Parallel Misalignment
AttributeKey17Dynamic Torque Reversing
AttributeKey18Axial Motion
AttributeKey19Torsional Stiffness
AttributeKey20Moment of Inertia
AttributeKey21Maximum Speed
AttributeKey22Material Specification
AttributeKey23Temperature
AttributeKey24Finish Specification
AttributeKey25Manufacturer
AttributeKey26Country of Origin
AttributeKey27Weight (lbs.)
AttributeKey28UPC
AttributeKey29Note 1
AttributeKey30Note 2
AttributeKey31Note 3
AttributeKey32Prop 65
moq, multiple, tierMinQty11
MPN, SKUPSR20-1/4"-6MM-A
qtyInStock0
tierMinQty210
tierMinQty325
tierMinQty450
tierPrice1122.23
tierPrice291.67
tierPrice368.45
tierPrice441.1

Distributor offers

SellerSKUMOQIn stockMultiplePrices
RulandPSR20-1/4"-6MM-A111 @ $122.23, 10 @ $91.67, 25 @ $68.45, 50 @ $41.10