As an Amazon Associate, we earn from qualifying purchases.

CRL ALUM-S710A48-VCP-1 Satin Anodized 48" Security Anti-Lift Track Assembly

CRL-USALUM . ALUM-S710A48-VCP-1

Gallery

Attributes

Brand name, Manufacturer name, ManufacturerCRL-USALUM
Attribute00, Attribute06Satin Anodized
Attribute0148" (1.22 m)
Attribute02Aluminum
Attribute03Included
Attribute0448
Attribute05D603A,S702A,S710A,TA20,D652,SDV732C
AttributeKey00Finish
AttributeKey01, length_AttribLength
AttributeKey02Glazing Type
AttributeKey03Anti-Lift Feature
AttributeKey04Width
AttributeKey05Components
AttributeKey06Finish/Color
CategoryIdL3Rolling Pass-Thru Assemblies
CategoryL1Hospitality & Display Shelving Systems
CategoryL2Service Windows and Doors
DimensionUnitinch
Extra Product NameCRL ALUM-S710A48-VCP-1 Satin Anodized 48" Security Anti-Lift Track Assembly
atoms, moq, multiple, tierMinQty11
extendedQty, qtyInStock0
length48.0
MPNALUM-S710A48-VCP-1
qtySourceupdateFromUrlEntry
snippet<br/> CRL supplies <b>Security Anti-Lift Aluminum Extrusions</b> for the fabrication of Sliding Track Assemblies used in display showcases. They incorporate a design that prevents lift-out, an extra measure of security when used with typical Upper Channel and Ratchet or Plunger Type Locks. You can use them with 3/16" to 1/4" (5 to 6 mm) thick glass, and they are no more difficult to install than normal, less secure track assemblies.<br/> For your convenience, CRL has provided ready-to-install Security Track Assemblies in pre-cut lengths of 36", 48", and 72" (914 mm, 1.22 m, and 1.83 m). These assemblies reduce your labor, minimize excess material, and are shipped to you ready-to-install, with all the required components included. CRL Cat. No. TA30 End Caps for use with Cat. No. S710A Security H-Bar can be ordered separately. <br/><b>How it Works:</b> The Security H-Bar can only be installed on the Security Lower Rails by tilting the sliding panel at a 70 degree angle, lifting the Ball Bearing Wheel Assembly on to the Lower Rail, then pushing the sliding panel to a full 90 degrees vertical. This must be done before you mount the Upper Double Channel permanently in the opening.<br/><b>The Result:</b> The bottom of the Security H-Bar is shaped so that it cannot be lifted off the specially designed Lower Rails and into the Upper Channel once it has been permanently mounted. This is the basis of this simple, yet effective design.<br/><b>General Glass Cutting Guidelines:</b><br/> Glass Height = Opening Height<br/> Minus 1-3/8" (35 mm)<br/><b>Product Warning:</b><br/>Maximum suggested panel size is 36" W x 48" H (914 mm x 1.22 m).<br/><p>.</p>
tierPrice1131.75

Distributor offers

SellerSKUMOQIn stockMultiplePrices
DK HardwareALUM-S710A48-VCP-1111 @ $131.75