As an Amazon Associate, we earn from qualifying purchases.

MDSDK57-20-17-A, 20mm x 17mm Double Disc Coupling, Aluminum | Ruland

Ruland . MDSDK57-20-17-A

Gallery

Attributes

Brand name, Manufacturer name, ManufacturerRuland
Attribute0020 mm
Attribute0117 mm
Attribute026 mm
Attribute035 mm
Attribute04, Attribute0537.0 mm
Attribute06+0.03 mm / -0.00 mm
Attribute0757.2 mm
Attribute0878.2 mm
Attribute0926.67 mm
Attribute10+0.000 mm / -0.013 mm
Attribute11M8
Attribute124 ea
Attribute13Alloy Steel
Attribute14Black Oxide
Attribute154.0 mm
Attribute1617 Nm
Attribute1712.73 Nm
Attribute182.0°
Attribute1925.45 Nm
Attribute200.30 mm
Attribute2150.9 Nm
Attribute220.76 mm
Attribute2386.9 Nm/Deg
Attribute2410,000 RPM
Attribute25Yes
Attribute28Hubs and Center Spacer: 2024-T351 Aluminum Bar
Attribute29-40°F to 200°F (-40°C to 93°C)
Attribute30Sulfuric Anodized MIL-A-8625 Type II, Class 2 and ASTM B580 Type B Black Anodize
Attribute31Ruland Manufacturing
Attribute32USA
Attribute33, Weight0.916600
Attribute34634529191309
Attribute358483.60.8000
Attribute3631163008
Attribute37This product has been discontinued as a standard item. Please inquire for special pricing.
Attribute38Torque ratings are at maximum misalignment.
Attribute39Performance ratings are for guidance only. The user must determine suitability for a particular application.
Attribute40Torque ratings for the couplings are based on the physical limitations/failure point of the disc springs. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the disc springs. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the disc springs. Keyways are available to provide additional torque capacity in the shaft/hub connection when required. Please consult technical support for more assistance.
AttributeKey00Bore (B1)
AttributeKey01Small Bore (B2)
AttributeKey02Keyway (K1)
AttributeKey03Keyway (K2)
AttributeKey04B1 Max Shaft Penetration
AttributeKey05B2 Max Shaft Penetration
AttributeKey06Bore Tolerance
AttributeKey07, height_AttribOuter Diameter (OD)
AttributeKey08, length_AttribLength (L)
AttributeKey09, width_AttribHub Width (LH)
AttributeKey10Recommended Shaft Tolerance
AttributeKey11Forged Set Screw
AttributeKey12Number of Screws
AttributeKey13Screw Material
AttributeKey14Screw Finish
AttributeKey15Hex Wrench Size
AttributeKey16Seating Torque
AttributeKey17Dynamic Torque Reversing
AttributeKey18Angular Misalignment
AttributeKey19Dynamic Torque Non-Reversing
AttributeKey20Parallel Misalignment
AttributeKey21Static Torque
AttributeKey22Axial Motion
AttributeKey23Torsional Stiffness
AttributeKey24Maximum Speed
AttributeKey25Full Bearing Support Required?
AttributeKey26Torque Wrench
AttributeKey27Recommended Hex Key
AttributeKey28Material Specification
AttributeKey29Temperature
AttributeKey30Finish Specification
AttributeKey31Manufacturer
AttributeKey32Country of Origin
AttributeKey33, Weight_AttribWeight (lbs)
AttributeKey34UPC
AttributeKey35Tariff Code
AttributeKey36UNSPC
AttributeKey37Note 1
AttributeKey38Note 2
AttributeKey39Note 3
AttributeKey40Note 4
AttributeKey41Prop 65
DimensionUnitmm
Extra Product NameMDSDK57-20-17-A, 20mm x 17mm Double Disc Coupling, Aluminum | Ruland
WeightUnitlbs
diameter, height57.2
keywordsMDSDK57-20-17-A, Double Disc Coupling
length78.2
moq, multiple, tierMinQty11
MPN, SKUMDSDK57-20-17-A
qtyInStock0
snippetRuland part number MDSDK57-20-17-A is an aluminum double disc coupling with 20mm x 17mm bores with keyways. Download a 2D/3D CAD file or purchase the MDSDK57-20-17-A directly from the manufacturer.
tierMinQty210
tierMinQty325
tierMinQty450
tierPrice1398.52
tierPrice2298.89
tierPrice3223.17
tierPrice4134
width26.67

Distributor offers

SellerSKUMOQIn stockMultiplePrices
RulandMDSDK57-20-17-A111 @ $398.52, 10 @ $298.89, 25 @ $223.17, 50 @ $134.00
cbtcompany.comMDSDK57-20-17-A11
Digi-Key13611379111 @ $398.52
motionindustries.com06265943111 @ $684.96