As an Amazon Associate, we earn from qualifying purchases.

PCMR32-11-7-SS, 11mm x 7mm Four Beam Coupling, Stainless | Ruland

Ruland . PCMR32-11-7-SS

Gallery

Attributes

Brand name, Manufacturer name, BrandRuland
ManufacturerRuland Ruland Manufacturing Co., Inc.
Attribute0011 mm
Attribute017 mm
Attribute02, Attribute0317.6 mm
Attribute0431.8 mm
Attribute05+0.025 mm / -0.000 mm
Attribute0638.1 mm
Attribute07+0.000 mm / -0.013 mm
Attribute08M4
Attribute09Alloy Steel
Attribute103.0 mm
Attribute11Black Oxide
Attribute124.6 Nm
Attribute132 ea
Attribute141.98 Nm
Attribute153.0°
Attribute163.96 Nm
Attribute170.38 mm
Attribute187.91 Nm
Attribute190.25 mm
Attribute200.57 Deg/Nm
Attribute2126.977 x10
Attribute226,000 RPM
Attribute23, Attribute24, Attribute25Yes
Attribute28Type 303 Austenitic, Non-Magnetic Bar
Attribute29-40°F to 350°F (-40°C to 176°C)
Attribute30Bright, No Plating
Attribute31Ruland Manufacturing
Attribute32USA
Attribute330.374000
Attribute34, UPC, EAN, EANList, UPCList634529049396
Attribute358483.60.8000
Attribute3631163003
Attribute37Torque ratings are at maximum misalignment.
Attribute38Performance ratings are for guidance only. The user must determine suitability for a particular application.
Attribute39Torque ratings for the couplings are based on the physical limitations/failure point of the machined beams. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the machined beams. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the machined beams. Please consult technical support for more assistance.
AttributeKey00Bore (B1)
AttributeKey01Small Bore (B2)
AttributeKey02B1 Max Shaft Penetration
AttributeKey03B2 Max Shaft Penetration
AttributeKey04, height_Attrib, width_AttribOuter Diameter (OD)
AttributeKey05Bore Tolerance
AttributeKey06, length_AttribLength (L)
AttributeKey07Recommended Shaft Tolerance
AttributeKey08Cap Screw
AttributeKey09Screw Material
AttributeKey10Hex Wrench Size
AttributeKey11Screw Finish
AttributeKey12Seating Torque
AttributeKey13Number of Screws
AttributeKey14Dynamic Torque Reversing
AttributeKey15Angular Misalignment
AttributeKey16Dynamic Torque Non-Reversing
AttributeKey17Parallel Misalignment
AttributeKey18Static Torque
AttributeKey19Axial Motion
AttributeKey20Torsional Stiffness
AttributeKey21Moment of Inertia
AttributeKey22Maximum Speed
AttributeKey23Full Bearing Support Required?
AttributeKey24Zero-Backlash?
AttributeKey25Balanced Design
AttributeKey26Torque Wrench
AttributeKey27Recommended Hex Key
AttributeKey28Material Specification
AttributeKey29Temperature
AttributeKey30Finish Specification
AttributeKey31Manufacturer
AttributeKey32Country of Origin
AttributeKey33, Weight_AttribWeight (lbs)
AttributeKey34UPC
AttributeKey35Tariff Code
AttributeKey36UNSPC
AttributeKey37Note 1
AttributeKey38Note 2
AttributeKey39Note 3
AttributeKey40Prop 65
DimensionUnitmm
Extra Product NamePCMR32-11-7-SS, 11mm x 7mm Four Beam Coupling, Stainless | Ruland
Weight0.374000 0.000625 272.16
WeightUnitlbs
diameter, height, width31.8
keywordsPCMR32-11-7-SS, Beam Coupling, Four Beam Coupling
length38.1
moq, multiple, tierMinQty1, Case, Item_package_quantity, NumberOfItems, Number_of_items, PackageQuantity1
MPN, SKU, Part Number, Model, ModelNumber, Model_number, PartNumber, Part_numberPCMR32-11-7-SS
qtyInStock0
snippetRuland part number PCMR32-11-7-SS is a 303 stainless steel four beam coupling with 11mm x 7mm bores. Download a 2D/3D CAD file or purchase the PCMR32-11-7-SS directly from the manufacturer.
tierMinQty210
tierMinQty325
tierMinQty450
tierPrice1208.36
tierPrice2189.42
tierPrice3157.85
tierPrice4142.06
Product GroupBISS
ASINB016APQ9V2 B08DLSZSJ7
AdultProduct, Autographed, Memorabilia, TradeInEligibleFalse
AsinB016APQ9V2
BindingMisc.
Bullet_pointFour beam couplings have higher torque and torsional stiffness than commodity style single beam couplings and are ideal for encoder, tachometer, and other light duty applications. Hardware exceeds DIN 912 12.9 standards for maximum torque capabilities. Ruland beam couplings are carefully made from select North American bar stock in our Marlborough, Massachusetts factory and are RoHS3 and REACH compliant. Manufactured from 303 stainless steel for increased torque capacity. Smaller bodies than six beam couplings allow them to fit in confined spaces. Zero-backlash and a balanced design for reduced vibration at speeds up to 6,000 RPM.
CatIndustrial & Scientific
CatId16310091
CatTree16310091 16310161 16310181 16411711 16411721
ClassificationId16411731
DisplayNameBeam
Externally_assigned_product_identifier, Identifier00634529049396 0634529049396 634529049396
FeatureZero-backlash with a balanced design for reduced vibration in high speed applications
FetchTime1535026983 1571447353 1659539965 1669502736 1676221719 1676698977 1679351466 1680089188 1714684740
Height1.3 1000 500 75
IdentifierTypeEAN GTIN UPC
IsBrandQueryTrue
ItemClassificationBASE_PRODUCT
ItemName, Item_name, TitleRuland PCMR32-11-7-SS 303 Stainless Steel Beam Coupling, 4-Beam Clamp Style, 11 mm x 7 mm Bores, 31.8 mm OD, 38.1 mm Length
Item_package_weight272.16
Item_type_keywordbeam-couplings
KeywordPCMR32-11-7-A
Label, Man, Publisher, StudioRuland Manufacturing Co., Inc.
Length6 6.0
Linkhttps://m.media-amazon.com/images/I/51dt819mOwL._SL75_.jpg https://m.media-amazon.com/images/I/51dt819mOwL.jpg https://m.media-amazon.com/images/I/61lOhj4PrbL.jpg
Marketplace_idATVPDKIKX0DER
MaterialStainless Steel
MaterialType303 Stainless Steel Stainless Steel
Maximum_rotational_speed6000.0
ParentAsinsB08DLSZSJ7
ProductGroupBISS BISS Basic
ProductTypeFLEXIBLE_COUPLINGS
ProductTypeNameBEARINGS_AND_BUSHINGS FLEXIBLE_COUPLINGS
Product_site_launch_date2015-10-06T08:00:01.000Z
SkuRULAND MANUFACTURING PCMR32-11-11-A RULAND MANUFACTURING PCMR32-11-11-SS RULAND MANUFACTURING PCMR32-11-7-SS RULAND PCMR32-11-7-A RULAND PCMR32-11-7-SS RULAND PCMR32-7-7-A RULAND PCMR32-7-7-SS
String_value11 x 7 31.8 38.1
StyleModern
TypeVARIATION ean gtin upc
URLhttp://ecx.images-amazon.com/images/I/51dt819mOwL._SL75_.jpg https://m.media-amazon.com/images/I/51dt819mOwL._SL75_.jpg
Unitinches millimeters pounds rpm
Unitsinches pixels pounds
VariantMAIN
WebsiteDisplayGroupbiss_basic_display_on_website
WebsiteDisplayGroupNameBISS Basic
Width1000 4 4.0 500 75

Distributor offers

SellerSKUMOQIn stockMultiplePrices
RulandPCMR32-11-7-SS111 @ $208.36, 10 @ $189.42, 25 @ $157.85, 50 @ $142.06
Raptor SuppliesAF9VMJ111 @ $398.89
cbtcompany.comPCMR32-11-7-SS111 @ $181.62
Digi-Key1359577211
ZoroG7898764111 @ $169.00
Grainger30VA29111 @ $285.60
sustainablesupply.comC16454641-211 @ $322.68
motionindustries.com048060401Not in Stock, Available to Order11 @ $182.41

Related on Amazon

As an Amazon Associate, we earn from qualifying purchases. (paid link) CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Ruland PCMR32-11-7-SS 303 Stainless Steel Beam Coupling, 4-Beam Clamp Style, 11 mm x 7 mm Bores, 31.8 mm OD, 38.1 mm Length
Brand: Ruland
Details
  • Four beam couplings have higher torque and torsional stiffness than commodity style single beam couplings and are ideal for encoder, tachometer, and other light duty applications.
  • Smaller bodies than six beam couplings allow them to fit in confined spaces.
  • Zero-backlash and a balanced design for reduced vibration at speeds up to 6,000 RPM.
  • Manufactured from 303 stainless steel for increased torque capacity.
  • Hardware exceeds DIN 912 12.9 standards for maximum torque capabilities. Ruland beam couplings are carefully made from select North American bar stock in our Marlborough, Massachusetts factory and are RoHS3 and REACH compliant.
Listing
BindingMisc.
Product groupBISS
Product typeBEARINGS_AND_BUSHINGS
ModelPCMR32-11-7-SS
Part numberPCMR32-11-7-SS
Items per pack1
LabelRuland Manufacturing Co., Inc.
ManufacturerRuland Manufacturing Co., Inc.
Catalog
FeatureZero-backlash with a balanced design for reduced vibration in high speed applications
CategoryIndustrial & Scientific
MPNPCMR32-11-7-SS
UPC634529049396
EAN634529049396
Product groupBISS
Product typeBEARINGS_AND_BUSHINGS
ManufacturerRuland Manufacturing Co., Inc.
View on Amazon (paid link)