As an Amazon Associate, we earn from qualifying purchases.

Ruland . BS26-17MM-1/2"-A

Ruland . BS26-17MM-1/2"-A

Attributes

Brand name, Manufacturer name, ManufacturerRuland
Attribute0017 mm
Attribute010.500 in
Attribute02, Attribute030.946 in, 24.0 mm
Attribute041.625 in, 41.3 mm
Attribute05+.001 in / -.000 , +.03 mm / -.00 mm
Attribute062.000 in / 50.8 mm
Attribute070.710 in, 18.05 mm
Attribute08M5
Attribute09Alloy Steel
Attribute102.5 mm
Attribute11Black Oxide
Attribute124 Nm
Attribute134 ea
Attribute14250 lb-in, 28.0 Nm
Attribute152.0°
Attribute16125 lb-in, 14.00 Nm
Attribute170.010 in, 0.25 mm
Attribute1862.5 lb-in, 7.00 Nm
Attribute190.020 in, 0.50 mm
Attribute20550 lb-in/Deg, 63 Nm/Deg
Attribute2110,000 RPM
Attribute22Hubs: 2024-T351 Aluminum Bar
Attribute23-40°F to 200°F
Attribute24Sulfuric Anodized MIL-A-8625 Type II, Class 2 and ASTM B580 Type B Black Anodize
Attribute25Ruland Manufacturing
Attribute26USA
Attribute270.3050
Attribute2863452914395
Attribute29Stainless steel hubs are available upon request.
Attribute30Torque ratings are at maximum misalignment.
Attribute31Performance ratings are for guidance only. The user must determine suitability for a particular application.
Attribute32Torque ratings for the couplings are based on the physical limitations/failure point of the metal bellows. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the metal bellows. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the metal bellows. Keyways are available to provide additional torque capacity in the shaft/hub connection when required. Please consult technical support for more assistance.
AttributeKey00Large Bore B1
AttributeKey01Small Bore B2
AttributeKey02B1 Shaft Penetration
AttributeKey03B2 Shaft Penetration
AttributeKey04Outer Diameter OD
AttributeKey05Bore Tolerance
AttributeKey06Length L
AttributeKey07Hub Width LH
AttributeKey08Forged Set Screw
AttributeKey09Screw Material
AttributeKey10Hex Wrench Size
AttributeKey11Screw Finish
AttributeKey12Seating Torque
AttributeKey13Number of Screws
AttributeKey14Static Torque
AttributeKey15Angular Misalignment
AttributeKey16Dynamic Torque Non-Reversing
AttributeKey17Parallel Misalignment
AttributeKey18Dynamic Torque Reversing
AttributeKey19Axial Motion
AttributeKey20Torsional Stiffness
AttributeKey21Maximum Speed
AttributeKey22Material Specification
AttributeKey23Temperature
AttributeKey24Finish Specification
AttributeKey25Manufacturer
AttributeKey26Country of Origin
AttributeKey27Weight (lbs.)
AttributeKey28UPC
AttributeKey29Note 1
AttributeKey30Note 2
AttributeKey31Note 3
AttributeKey32Note 4
AttributeKey33Prop 65
moq, multiple, tierMinQty11
MPN, SKUBS26-17MM-1/2"-A
qtyInStock0
tierMinQty210
tierMinQty325
tierMinQty450
tierPrice1181.86
tierPrice2109.12
tierPrice390.93
tierPrice481.84

Distributor offers

SellerSKUMOQIn stockMultiplePrices
RulandBS26-17MM-1/2"-A111 @ $181.86, 10 @ $109.12, 25 @ $90.93, 50 @ $81.84