AttributeKey05: Milling Dia.

Products with this attribute (41 total)

18.000 mm Cutter DIA x 45.00 mm Length of Cut Carbide Square End Mill for Aluminum Alloys, 3 Flutes, ZrN Coated

Ball End Mill, 1/2 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through

Ball End Mill, 2 mm Milling Dia., Carbide, Non-Coolant Through

Ball End Mill, 3/4 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through

Ball End Mill, 4.00mm Dia, Carbide

Ball End Mill, Carbide, 0.0350"Milling dia

Ball End Mill, Carbide, 0.1875"Milling dia

Carbide End Mill,7/64In,2FL,Single,1-1/2

Chamfer End Mill,3/8 in. Dia,Carbide,209

Corner Chamfer End Mill, 16.00 mm Milling Dia., Carbide, Straight, Metric, 0.30 mm, 75.00 mm

Corner Radius End Mill, 1 in Milling Dia., Carbide, ZrN, Straight, Fractional Inch, 0.06 in, 2 in, 8 in

Corner Radius End Mill, 1.00 mm Milling Dia., Carbide, AlTiN, Straight, Metric, 0.10mm, 1.00 mm, 57.00 mm

Corner Radius End Mill, 1/2 in Milling Dia., Carbide, ZrN, Straight, Fractional Inch, 0.03 in, 1 in, 3 in

Corner Radius End Mill, 20.00 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Metric, 0.50mm, 38.00 mm, 115.00 mm

Corner Radius End Mill, 20.00mm Milling Dia., Carbide, Bright (Uncoated), Metric, 0.1200 in, 25/32 in, 140.00mm

Corner Radius End Mill, 3/8 in Milling Dia., Carbide, TiAlN, Non-Coolant Through, Straight, Fractional Inch, 0.03 in, 2 1/2 in, 4 in

Corner Radius End Mill,nACo,2.000" L

Corner Radius End Mill,nACo,3.000" L

Corner Radius End Mill,Uncoated,2.5" L

Drill/End Mill, 2 & 4 Flute, 0.4375" (7/16) Cutter dia, Length of Cut: 1"

End Mill,15/64 in.4 Flutes,TiCN

End Mill,5/8 in.4 Flutes,TiN

End Mill,5/8 in.4 Flutes,TiN

Square End Mill, 0.0937" Milling dia.

Square End Mill, 1/64 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 1/16 in, Overall Length 1 1/2 in, Shank Dia. 1/8 in

Square End Mill, 20.00 mm Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 38.00 mm, Overall Length 104.00 mm, Shank Dia. 20.00 mm

Square End Mill, 3/4 in Milling Dia., Carbide, TAZ, Straight, Length of Cut 1 37/64 in, Overall Length 4 in, Shank Dia. 3/4 in, Neck Dia. Not Applicable

Square End Mill, 5.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 10.00 mm, Overall Length 57.00 mm, Shank Dia. 6.00 mm

Square End Mill,5/8" Cut Length,nACRo

Square End Mill,WS15PE Grade,Carbide