Directions: ['Follow label directions. General Use instructions - 1. Blockade areas to be finished. Floors will be very slippery until dry. 2. Strip floor using Floor Science stripper per the label instructions. 2. Apply 2-3 uniform coats using a clean mop. If higher gloss is desired apply additional coats. Do not apply more than 4 coats in a 24 hour period. 3. Allow 40-50 minutes drying time between coats. BEFORE RECOATING 1. Dust mop or sweep 2. Deep scrub floor using recommended Floor Science brand cleaner according to label directions. 3. Apply 1-2 coats using a clean mop. MAINTENANCE 1. Dust mop or sweep. 2. Clean the floor with a mop or an automatic scrubber using the recommended Floor Science cleaner according to label directions 3. If desired, spray buff using Floor Science Cleaner & Restorer Spray Buff to enhance gloss. 1500 rpm equipment. Dry buff using a medium to aggressive pad and 1000-1500 rpm equipment. Ultra High Speed burnish using a medium to aggressive pad and 2000 rpm equipment REMOVAL 1. Remove using Floor Science Heavy Duty Floor Stripper according to label directions']

Products with this attribute (1 total)