Product_description: ['Seco-Larm MVE-AH1E1-01NQ HDMI Extender Over Single Cat5e/6, Supports Resolutions From 480i To 1080p, Plug And Play Operation, 2x5VDC Power Supplies Included <ul> <li>Extend HDMI over a single Cat5e/6 cable</li> <li>Supports resolutions from 480i to 1080p with zero signal loss</li> <li>Transmits up to 164ft (50m) at 1080p over Cat5e/6 cable</li> <li>HDMI Loop output for local HDMI display</li> <li>Plug and play operation – comes as a complete set</li> <li>IR Pass-through for remote control extension and operation</li> <li>EDID Management switch</li> <li>Two (2) 5VDC power supplies included</li> </ul> Specifications <ul> <li>Input Video Signal: 3.3V</li> <li>Input DDC Signal: 5Vp-p (TTL)</li> <li>Deep Color: 24-Bit</li> <li>Video Format Supported: High-speed HDMI, HDCP 1.2</li> <li>Audio Formats Supported: LPCM, Dolby-AC3, DTS7.1, DSD</li> <li>Output Video: HDMI</li> <li>Resolutions Supported: 1080p/1080i/720p/576p/576i/480p/480i</li> <li>Range - 4K: Up to 164\' (50m)</li> <li>Video Amplifier Bandwidth: 4.95Gbps</li> <li>Maximum Input Cable Length: 24AWG (15m), 26AWG (10m), 28AWG (5m)</li> <li>Video Input Connector: HDMI Type A 19-pin female</li> <li>IR Pass-through Frequency: 30~60 kHz</li> <li>Operating Voltage: 5VDC</li> <li>Power Supply: 1A@5VDC (2 Adapters) (2.1mm plug)</li> <li>ESD Protection (Human Body Model): ±8kV (Air-gap discharge), ±4kV (contact discharge)</li> <li>Cat5e/6 Wiring Standard: T568-B</li> <li>Current Draw: Transmitter- 300mA@5VDC Receiver- 200mA@5VDC</li> <li>Operating Temperature: 32°~104° F (0°~40° C)</li> <li>Operating Humidity: 20~90% RH (no condensation)</li> <li>Dimensions: 31/8"x11/16"x25/8" (79x17x67 mm)</li> <li>Weight: 5.3-oz (150g) (Each)</li> <li>Maximum Single Link Range: 1080p</li> </ul>']

Products with this attribute (1 total)