snippet: Applications <ul><li>Chemical, pulp and paper, oil and gas refineries, military, air compressors and machine tools </li> <li>Well-suited for a variety of processing and general industry hydraulic applications </li> </ul> Use <ul><li>Ideally suited for use with tubing having medium to extra heavy wall thicknesses. </li> <li>Fittings are suitable for sub-zero through elevated temperature applications </li> </ul> Specifications <ul><li>Exceeds Military (MIL F18866) and SAE J514 standards </li> </ul> Features <ul><li>3 piece design including only one ferrule eliminates possible make-up errors that may occur using a twin ferrule tube fitting. </li> <li>Minimal risk of improper assembly as the ferrule visibly bites into the tubing which allows installer to visually inspect the bite quality. </li> </ul> Installation <ul><li>Cut, de-burr and clean tubing </li> <li>Pre-set ferrule onto tubing </li> <li>Inspect ferrule bite in tubing by disassembling the fitting and visually inspecting the de-burred end of the tube for slight indentation. </li> <li>Finger tighten nut and then further wrench tighten nut another 1/3" to 1/2" turn. </li> </ul> Note <ul><li>Temperature rating is limited by the material chosen </li> <li>Pressure ratings are determined by the size (OD) and wall thickness (inches/mm) of the tubing on which they are to be installed </li> </ul>

Products with this attribute (1 total)