Variant: ['MAIN']

Products with this attribute (220338 total)

1.000 mm Cutter DIA x 0.20 mm Radius x 1.50 mm Length of Cut x 4.00 mm Reach Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 2 Flutes

1.04mm Class ZZ No-Go (Minus) Pin Gage (+.0000\

1.06DXPSRM02.00

1.0Tb Aura N Ssd Add-On So

1.14 cu in Prince Hydraulic Pump SP25A19A9H2R | Gear Pumps | Hydraulic Pumps | Hydraulics | www.surpluscenter.com

1.14.001.503/0000

1.20123.0240000

1.20mm Diameter Metric Mini Nano 2 Flute End Mill Coated Nano-Tek Micro-100 Part # MEFM-012-600-20K

1.20mm Diameter Metric Mini Nano 2 Flute End Mill Micro-100 Part # MEFM-012-1000-20

1.28 gpf Elongated Two Piece Toilet in White

1.28 gpf Sensor Flush Valve

1.28 gpf Toilet Tank in Cotton

1.30070.001/1607

1.39mm Class ZZ Go (Plus) Pin Gage (+.0002\

1.5 Degree Carbide Tapered End Mill - 3 Flute 1/8'' Tip Diameter 0.1643'' Large Diameter ,1/4'' Shank ,3/4'' Length of Cut 1.5? Carbide TEM - 3 Flute x 1/8'' Tip x 0.1643'' LD x 1/4'' Shank x 3/4'' LOC x 2 1/2'' OAL w/ Ball End Conical Part #AAX-203C-BE

1.5 Degree HSS Tapered End Mill - 3 Flute 5/32'' Tip Diameter 0.2217'' Large Diameter ,3/8'' Shank ,1 1/4'' Length of Cut 1.5? HSS TEM - 3 Flute x 5/32'' Tip x 0.2217'' LD x 3/8'' Shank x 1 1/4'' LOC x 3 1/4'' OAL w/ Ball End Conical Part #AAX-255-BE

1.5 Degree Profile Rib Cutter - 4 Flute 0.040'' Tip Diameter 3/16'' Shank ,0.280'' LOC ,3'' OAL w/ 0.010'' Corner Radius 1.5? Profile Rib Cutter - 4 Flute x 0.040'' Tip x 3/16'' Shank x 0.280'' LOC x 3'' OAL w/ 0.010'' Corner Radius & AlTiN-X Nano Coating Conical Part #AAX01.040R

1.5 Degree Profile Rib Cutter - 4 Flute 0.100'' Tip Diameter 3/16'' Shank ,0.700'' LOC ,3'' OAL w/ 0.010'' Corner Radius 1.5? Profile Rib Cutter - 4 Flute x 0.100'' Tip x 3/16'' Shank x 0.700'' LOC x 3'' OAL w/ 0.010'' Corner Radius & AlTiN-X Nano Coating Conical Part #AAX01.100R

1.5 Watt 3000K LED Light Bulb | Capitol Lighting

1.50% (w/v) Aqueous Potassium Iodate/Iodide/Biiodate Solution, 20 L, Ricca R6287500-20F New Laboratory Setup Savings - up to 40%, Magnetic Stirrer, Vortex Mixer, Sample Prep, Centrifuge

1.50mm Diameter Metric Mini Nano 2 Flute End Mill Coated Nano-Tek Micro-100 Part # MEFM-015-600K

1.50mm Diameter Metric Mini Nano 2 Flute End Mill Micro-100 Part # MEFM-015-1000

1.52mm Diameter HSS 130? Point GT100 Parabolic Flute Taper Length Drill, Bright Finish, 50mm LOC, 76mm OAL 50mm LOC,76mm OAL,1.52mm Shank Series No. 535, Order Code 01.520, Guhring Part #9005350015200

1.5KE100CA-E3/54

1.5KE250CA-E3/54

1.5KE27CA-E3/54

1.5KE39ARL4G - ON Semiconductor - Diodes

1.5mm Diameter APERTURE-4XD High Performance Carbide Drill, 140? 4-Facet Point, nACRo Coated, 8.8mm Flute, 38mm OAL 8.8mm Flute Length,3mm Shank,38mm OAL GWS/Monster 2 flute Aperture-4X carbide drills are made from C-2 Sub-Micron Grain Carbide With 10% Cobalt Content. Proprietary 140? drill point technology utilizes a perfected combination of facets, corner breaks, and edge prep to produce the strongest cutting action. nACRo coating provides unrivaled lubricity and temperature reduction. 4xD perfectly blends the rigidity of 3xD and the versatility of 5xD. This self-centering drill provides the fastest penetration and ultimate tool longevity. Made in the USA. GWS/Monster Tool Part #434-000591B

1.5SMC15AT3G - ON Semiconductor

1.5SMC22AT3G - ON Semiconductor

1.5SMC30AT3G - ON Semiconductor

1.5SMC36AT3G - ON Semiconductor

1.5SMC43AT3G - ON Semiconductor

1.5SMC440A-E3/57T

1.5SMC51AT3G - ON Semiconductor

1.5SMC6.8AT3G - ON Semiconductor

1.5SMC82AT3G - ON Semiconductor

1.5V DC Motor FE-260-2670 Jameco Reliapro

1.654 cu in Prince SP20B27A9H9R Hydraulic Pump | Gear Pumps | Hydraulic Pumps | Hydraulics | www.surpluscenter.com

1.66 cu in Prince Hydraulic Pump SP25A27A9H2L | Gear Pumps | Hydraulic Pumps | Hydraulics | www.surpluscenter.com

1.75DXPSR01.00 - 1.75DXPSR01.00 | Wilson Company

1.8m HDMI 1.3a, M/M, Black

1.90690.3510000 RAFI USA | Switches | DigiKey

1.94mm Class ZZ Go (Plus) Pin Gage (+.0002\

1/2 DR RATCHET REPAIR KIT-TETH

1/2 in. PEX x 22 in. L Brass Freezeless Brass Model 17 Anti-Siphon Sillcock

1/2 in. Sweat Copper Full-Slip Coupling

1/2 Rigid After Five Gracey Curette #9 EverEdge | Supply Clinic

1/2 X 11/16 X 3/4. Cast Bronze C96900 Sleeve Bearing

1/2 x 24" 60 Grit Aluminum Oxide Sanding Belt, 10PK

1/2 x 3/4 in. Bronze Reduced Port Threaded x NPSH 600# Ball Valve

1/2" Carbide Spade Drill Bit, Drill America | DMO1/2SPADE | DrillsandCutters.com

1/2" Dr, 13/16" Size, SAE Impact Socket, 6 Pts

1/2" PBV Series PVC Diaphragm Back Pressure Valve

1/2" x 20' - 3 Leg Chain Sling w/ Sling Hooks - Grade 100

1/2"-13 Plain Finish 18-8 Stainless Steel Nylon Insert Jam Lock Nut, 10 pk.

1/2"-20 Hex Head Cap Screw, Plain 18-8 Stainless Steel, 5-1/2 in L, 15 PK

1/2"-13, Plug, UNC, 3 Flutes, Bright

1/2"-13, Plug, UNC, 3 Flutes, TiN

1/2-13 x 1 3/4 Hex Cap Screws, Grade 2 Zinc Plated Steel Coarse Thread Fully Threaded, 275PK

1/2-13x4 1/2 Hex Head Cap Screws, Alloy Steel Gr 8, Zinc Yellow, 4 1/2 inch, 1/2 inch, 125PK

1/2-16 UN 2A Steel Go Ring Gage. Vermont Gage USA Part # 361140510. Vermont Gage's Thread Gages inspect the pitch diameter and the functional thread for both internal and external threaded products. All stocked Thread Gages are made to Class X tolerances per ASME B1.2 (Unified Inch screw threads) and ASME B1.16M (Metric M series screw threads). All Thread Gages are supplied with a Certificate of Accuracy. Work Plugs are stocked in 2B & 3B (Inch) or 6H (Metric) classes of fit. Rings and Setting Plugs are stocked in 2A and 3A (Inch) or 6g (Metric) classes of fit. Stocked Work Plugs are chrome plated. All Thread Gages are marked with nominal size, threads per inch (Inch) or pitch (Metric), class of fit and pitch diameters. Nist Traceable, Certificate Of Accuracy Included. Vermont Gage USA Part #361140510

1/2-20x1 Hex Head Cap Screws, Alloy Steel Gr 9, Zinc Yellow, FineUNF, 1 Inch, 1/2 Inch, 50PK

1/2-in. Drive 18mm 12 Point Deep Socket features a deep well construction and internal construction designed to engage with the flats of fasteners. This allows for the user to reach those hard to reach fasteners and torque without the fear of stripping a bolt.Find the CM SCKT 18MM12PTDP1/2DR at Ace.