mpn:
brand:
manufacturer:
MPN:
Description:
The XM251522T is produced by Baldor and is described as a Baldor XM251522T 34M 2P XPFC HOR 254T T'STATS INV DUTY
Attributes
| Key ^ | Value |
|---|---|
| Agency approvals | UL |
| Ambient temperature (?C) | 40 |
| Auxillary box | No auxillary box |
| Base indicator | Rigid |
| Bearing grease type | Polyrex EM (-20F +300F) |
| Break-down torque | 97.6 lb-ft |
| Constant torque speed range | 6 |
| Current @ voltage | 37.000 A @ 208.0 V |
| Design code | A |
| Drip cover | No drip cover |
| Duty rating | CONT |
| Efficiency @ 100% load | 91.0 % |
| Electrically isolated bearing | Not electrically isolated |
| Enclosure | XPFC |
| Feedback device | No feedback |
| Frame | 254T |
| Frame material | Iron |
| Frequency | 50.00 Hz |
| Full load torque | 0 lb-ft |
| Heater indicator | No heater |
| High voltage full load amps | 14.5 a |
| Insulation class | F |
| Inverter code | Inverter duty |
| KVA code | H |
| Lifting lugs | Standard lifting lugs |
| Line-line res @ 25? C | 0.591 Ohms A Ph / 0 Ohms B Ph |
| Locked bearing indicator | Locked bearing |
| Locked-rotor torque | 43.2 lb-ft |
| Max Speed | 5400 rpm |
| Motor lead quantity/wire size | 9 @ 12 AWG |
| Motor lead termination | Flying leads |
| Motor letter type | Three phase |
| Motor standards | NEMA |
| Motor type | X0934M |
| Mounting arrangement | F1 |
| No-load current | 0 A |
| Number of poles | 2 |
| Output @ frequency | 15.000 HP @ 60 HZ |
| Overall Length | 25.50 in |
| Phase | 3 |
| Power factor | 88 |
| Product family | Hazardous location motor |
| Pull-up torque | 34.9 lb-ft |
| Pulley end bearing type | Ball |
| Pulley face code | Standard |
| RoHS status | ROHS NON-COMPLIANT |
| Service factor | 1.15 |
| Shaft Diameter | 1.625 in |
| Shaft ground indicator | No shaft grounding |
| Shaft rotation | Reversible |
| Shaft slinger indicator | No slinger |
| Speed | 2940 rpm |
| Speed code | Single speed |
| Start configuration | DOL |
| Starting current | 125 A |
| Starting method | Direct on line |
| Synchronous speed @ frequency | 3600 RPM @ 60 HZ |
| Temp rise @ rated load | 42? C |
| Temp rise @ SF load | 51? C |
| Thermal device - winding | Normally closed thermostat |
| Vibration sensor indicator | No vibration sensor |
| Voltage @ frequency | 190.0 V @ 50 HZ |
| XP class and group | CLI GP D; CLII GP F,G |
| XP division | Division I |
| XP temp code | T3C |