| 1-wire Serial Interface, Common Ethernet Protocol, IO Link, PC Configurable, Profibus, PROFINET, RS-232, RS-422, RS-485, SSI, Wireless | No |
| Adjustments | Push Button; Remote Teach |
| Alarm Output (mA), Max Discrete (Switched) Output (mA) | 100 |
| Analog Resolution/Discrete Repeatability | 35 mm to 60 mm: +/-0.5; 60 mm to 310 mm: +/- 1% of range |
| Chemical Resistant, Clear Object Detection, Ecolab Certified, Laser Control, Quick Disconnect, Remote Teach, Timing (Hold/Delay), Washdown Rated | Yes |
| Connection | Integral QD |
| Delay at Power-up (ms) | 750 |
| Device Type | Sensor |
| Digital Input/Output Type | Discrete |
| Discrete (Switched) Outputs | 1 NPN |
| Discrete Output Hysteresis (mm) | Automatically adjusted |
| Housing Style | Rectangular |
| Indicator | Display; LED(s) |
| IP Rating | IP67; IP68; IP69 |
| Laser Classification | Class 1 |
| Max Ambient Light (Lux) | 5000 |
| Max Measurement Range | >100 mm - <=500 mm |
| Max Off-state Leakage Current (?A) | 5 @ 30 V dc |
| Max Op. Relative Humidity Non-Condensing (%) | 95 at 55C |
| Max Operating Temperature (C) | 50 |
| Max Sensing Distance (mm) | 310 |
| Mechanical Shock | MIL-STD-202G, Meth. 213B, Cond. I (100G 6x along X, Y and Z axes, 18 total shocks) w/ sensor operating |
| Min Operating Temperature (C) | -10 |
| Minimum Response Time (ms) | 1.5 |
| Minimum Sensing Distance (mm) | 35 |
| Minimum Window Size (mm) | 0.4 |
| Number of Pins | 4 |
| Output Protection | Protected against continuous overload and short circuit |
| Output Saturation Voltage NPN Outputs | <1.0 V @ 100 mA |
| Power | DC |
| Power Supply | 10-30 V dc |
| Power/Current Consumption (exclusive of load) | < 675 mW |
| Primary Housing Material | Stainless Steel |
| Quick Disconnect Type | M12 (Euro) |
| Sensing Beam | Visible Red Laser |
| Sensing Beam Wavelength (nm) | 655 |
| Sensing Mode (Detailed) | BACKGROUND/Foreground Suppression |
| Sensing Mode (General) | Proximity |
| Spot Size (@ Reference Distance) | 2.0 mm x 0.8 mm @ 300 mm |
| Storage Temperature (C) | -25 to 75 |
| Supply Protection Circuitry | Protected against reverse polarity and transient overvoltages |
| Temperature Effect (mm/C) | +/- 0.05 mm/C from 25 to 125 mm, +/- 0.35 mm/C at 300 mm |
| Vibration | MIL-STD-202G req. Method 201A (vibration:10 to 60Hz max., double amplitude 0.06", max acc. 10G). |
| Warm-up Time (minutes) | 10 |
| Window Material | Acrylic |