Cecomp Electronics CTP3B15PSIA-NC

<p><strong>Cecomp Electronics, CTP3B15PSIA-NC, CTP3B Battery Powered Digital Pressure Gauge with 3 Button Keypad and NIST Traceability Documentation, 15-0 PSI Abs, 15.0 PSI </strong> </p> <p><strong>Display back lighting </strong> </p> <p>Display back lighting can be turned on by momentarily pressing the power button whenever the gauge is on. This also restarts the auto shutoff timer. The factory default on-time is 1 minute, but the setup procedure allows setting it to 1 to 255 minutes, or to 0 to disable display back lighting. The LED display back lighting may not be apparent under bright lighting conditions. </p> <p><strong>Shutoff </strong> </p> <p>The auto shutoff timer starts at power up and resets whenever any button is pressed. The default time is 5 minutes, but can be set for a variety of times. If on/off operation is selected, the gauge will stay on until manually shut off or the batteries are depleted. Turn gauge off when not in use to conserve battery life. When an auto shutoff time is used, the display indicates OFF five seconds prior to shutoff. Press the power button to keep the gauge on. To shut the gauge off manually, press and hold (about 5 seconds) the center power button until OFF is displayed. </p> <p><strong>Options </strong> </p> <ul><li><strong>NC </strong> - NIST traceability documentation, 5 points and date </li> </ul> <p>Red rubber boot White LED backlight All metal case Port reinforcement Coated circuit boards </p> <p><strong>Features: </strong> </p> <ul><li>?0.1% Test Gauge Accuracy in Most Ranges </li> <li>Ultra-Ruggedized Design </li> <li>316L Stainless Steel Wetted Parts </li> <li>Keypad Selectable Units and Auto Shutoff Times </li> <li>White LED Display Backlight </li> <li>Min/Max Memory </li> </ul>