| Aircraft Drill | Yes |
| Coolant Fed | Non-Coolant Through |
| Cutting Direction, Spiral Direction | Right Hand |
| Decimal Equivalent | 0.2810 |
| Depth:Dia. Ratio | 4xD |
| Drill Bit Grouping | Individual |
| Drill Bit Point Angle | 135 Degrees |
| Drill Bit Point Type | Split Point |
| Drill Bit Size | K |
| Drill Diameter Tolerance | +0.0000 in /-0.0010 in |
| Drill Length Class | Jobber Length |
| Drill Point Length | 0.0000 in |
| Finish - Machining | Bright (Uncoated) |
| Flute Length | 2 15/16 in |
| Flute Type | Spiral |
| Helix Angle | 21 Degrees to 34 Degrees |
| Item | Jobber Length Drill Bit |
| Material - Machining | High Speed Steel |
| Material Grade - Machining | High Performance |
| Maximum Drilling Depth | 1 7/64 in |
| Measurement System | Letter |
| Number of Flutes | 2 |
| Overall Length | 4 1/4 in |
| Primary Material Application | Aluminum, Brass, Bronze, Copper, Steel |
| Primary Material Application ISO Code | N, P |
| Secondary Material Application | Cast Iron, Stainless Steel |
| Secondary Material Application ISO Code | K, M |
| Series | 2222 |
| Shank Dia. | 17/64 in |
| Shank Length | 1 5/16 in |
| Shank Type - Machining | Straight |
| Standards | NAS907 Type B |