| Bearings | Needle Throughout, Ball on Motor |
| Brushes | Externally Replaceable |
| Full Load Amps | 0.26 |
| Gear Case, Housing Material | Die Cast Aluminum |
| Gear Material | Hardened Steel |
| Gear Ratio | 362:1 |
| Gear Type | Hardened Steel, 1st Stage Helical, Subsequent Stages Spur |
| Gearmotor Enclosure | Totally Enclosed Nonventilated |
| Gearmotor Mounting Position | All Angle |
| Gearmotor Rotation | CW/CCW |
| Gearmotor Shaft Orientation | Parallel |
| Gearmotor Shaft Type | Single |
| Gearmotor Type, Item | DC Gearmotor |
| Gearmotor Voltage | 90 V DC |
| Input HP | 1/20 |
| Length Less Shaft | 8" |
| Lubrication | Permanent Heavy Fluid Gear Oil |
| Max. Ambient Temp. | 40 Degrees C |
| Max. Torque | 160 in-lbs |
| Motor Type | Permanent Magnet DC |
| Nameplate RPM | 5 |
| Overall Length | 9" |
| Overhung Load | 115 lbs. |
| Rear Shaft Encoder/Pulse Generator Mounting | Yes |
| Replacement Brushes | DTN6YHY3 |
| Reversible Shaft Output | No |
| Seals | Spring Loaded Lip Type on Input and Output Shaft |
| Shaft Dia. (Dimension U) | 1/2" |
| Shaft Length (Dimension V) | 1" |
| Standards | UL Recognized, C-UL Recognized |
| Thermal Protection | None |