| Bearings | Needle Throughout with Thrust Balls on Case, Ball on Motor |
| Brushes | Externally Replaceable |
| Full Load Amps | 2.30 |
| Gear Case, Housing Material | Die Cast Aluminum |
| Gear Material | Hardened Steel |
| Gear Ratio | 43:1 |
| Gear Type | Hardened Steel, 1st Stage Helical, Subsequent Stages Spur, AGMA Class 9 |
| Gearmotor Enclosure | Totally Enclosed Nonventilated |
| Gearmotor Mounting Position | All Angle |
| Gearmotor Rotation | CW/CCW |
| Gearmotor Shaft Orientation | Parallel |
| Gearmotor Shaft Type | Single |
| Gearmotor Type, Item | DC Gearmotor |
| Gearmotor Voltage | 90 V DC |
| Input HP | 1/4 |
| Length Less Shaft | 12-1/8" |
| Lubrication | Permanent Heavy Fluid Gear Oil |
| Max. Ambient Temp. | 40 Degrees C |
| Max. Torque | 300 in-lbs |
| Motor Type | Permanent Magnet DC |
| Nameplate RPM | 42 |
| Overall Length | 13-5/8" |
| Overhung Load | 215 lbs. |
| Rear Shaft Encoder/Pulse Generator Mounting | Yes |
| Replacement Brushes | DTN6YHZ0 |
| Reversible Shaft Output | No |
| Seals | Spring Loaded Lip Type on Input and Output Shaft |
| Shaft Dia. (Dimension U) | 5/8" |
| Shaft Length (Dimension V) | 1-1/2" |
| Standards | C-UL Recognized, UL Recognized |
| Thermal Protection | None |