| Bearings | Ball on Motor; Needle Throughout |
| Country of Origin | USA |
| Full Load Amps | 0.38/0.22 |
| Gear Case Material, Housing | Die Cast Aluminum |
| Gear Material | Hardened Steel |
| Gear Ratio | 362:1 |
| Gear Type | Helical First Stage/Subsequent Stages Spur |
| Gearmotor Brake Type, Thermal Protection | None |
| Gearmotor Enclosure | Totally Enclosed Nonventilated |
| Gearmotor Mounting Position | All Angle |
| Gearmotor Phase | 1 |
| Gearmotor Rotation | CW/CCW |
| Gearmotor Shaft Orientation | Parallel |
| Gearmotor Shaft Type | Single |
| Gearmotor Type | AC Gearmotor |
| Gearmotor Voltage | 115/230V AC |
| Gears | 1st Stage Helical; Hardened Steel; Subsequent Stages Spur |
| Hz | 60/50 Hz |
| Input HP | 1/20 hp |
| Item?, Mfr. Model? | 2H604 |
| Length Less Shaft | 7-1/2 in |
| Lubrication | Permanent Heavy Fluid Gear Oil |
| Max. Ambient Temp. | 40 ?C |
| Max. Torque | 160 in-lb |
| Motor Type | PSC |
| Nameplate RPM | 4.6 RPM |
| Overhung Load | 115 lb |
| Seals | Spring Loaded Lip Type on Input and Output Shaft |
| Shaft Dia. (Dimension U) | 1/2 in |
| Shaft Length (Dimension V) | 1 in |
| Standards | C-UL Recognized; CE Certified; UL Recognized |
| UNSPSC | 26101602 |