| Bearings | Needle Throughout with Thrust Balls on Case, Ball on Motor |
| Capacitor Required | Included |
| Country of Origin (subject to change) | United States |
| Dimension A | 5.2/2.8 in |
| Dimension D1 | 5.61" |
| Dimension D2 | 6.76" |
| Dimension L | 15.1" |
| Enclosure | TEFC |
| Full Load Amps | 5.2/2.8 |
| Gear Case Material, Housing | Die Cast Aluminum |
| Gear Material | Hardened Steel |
| Gear Ratio | 20:1 |
| Gear Type | Helical First Stage/Subsequent Stages Spur/AGMA Class 9 |
| Gearmotor Brake Type, Thermal Protection | None |
| Gearmotor Enclosure | Totally Enclosed Fan-Cooled |
| Gearmotor Mounting Position | All Angle |
| Gearmotor Phase, Phase | 1 |
| Gearmotor Rotation | CW/CCW |
| Gearmotor Shaft Orientation, Shaft Orientation | Parallel |
| Gearmotor Shaft Type | Single |
| Gearmotor Type, Item | AC Gearmotor |
| Gearmotor Voltage | 115/230V AC |
| Gears | Hardened Steel, 1st Stage Helical, Subsequent Stages Spur, AGMA Class 9 |
| Hz | 60/50 Hz |
| Input HP | 1/2 hp |
| Length Less Shaft | 16 in |
| Lubrication | Permanent Heavy Fluid Gear Oil |
| Max. Ambient Temp. | 40 Degrees C |
| Max. Torque | 345.0 in-lb |
| Motor Type | PSC |
| Mounting | All Position |
| Nameplate RPM | 81 RPM |
| Overhung Load | 550 lb |
| Rotation | Reversible |
| RPM Range | 76 to 100 |
| Seals | Spring Loaded Lip Type on Input and Output Shaft |
| Shaft Dia. (Dimension U) | 3/4" |
| Shaft Length (Dimension V) | 1.88" |
| Standards | UL Recognized, CSA Certified |
| Voltage | 115/230 |
