| Agency Compliance | CSA |
| Ambient (C) | 40 Degrees C |
| Amps Holding | 0.34/0.17 |
| Application | Stops And Holds Rotating Loads On Conveyors, Crane Trolleys And High Speed Doors |
| Brake Mouting Position | Horizontal |
| Coil Volts | 115/208-230V AC Or 95/174-190V AC |
| Converts | Converts NEMA C-Face Motors And Gear Reducers To A Geared Brake Motor |
| Country of Origin (subject to change) | United States |
| Dia. (In.) | 6 7/8 in |
| Duty | Continuous |
| Enclosure | Waterproof/Dust-Tight |
| Features | Easily Installed |
| Finish | Gray Enamel Paint |
| For Use With | Single And Three Phase General Purpose C-Face Motors For Indoor/Outdoor Applications |
| Function | Spring Set Brake With Automatic Reset Release |
| Hz | 60/50 |
| Includes | Hardware |
| Inrush Amps | 2.43/1.22 |
| Item | Brake |
| Keyseat Size (In.), Max. Bore (In.), Voltage (DC), Width (In.) | - |
| Length (In.) | 4.875 in |
| Lever Type | Manual Release |
| Max. HP @ 1725 RPM | 3 hp |
| Max. HP @ 3450 RPM | 5 hp |
| Max. RPM | 3,450 RPM |
| Mounts On | NEMA C-Face Flanges On Motors And Gear Reducers |
| NEMA/IEC Frame | 56C/140TC |
| Phase | single |
| Power Lead Length (In.) | 15 |
| Series | 60 Series |
| Service Factor | 1.0 |
| Shaft Dia. (In.) | 5/8 in |
| Static Torque (Ft.-Lb.) | 10 |
| Type | Double C-Face Magnetic Disc |
| Voltage @ 50 Hz | 95/174 a 190 |
| Voltage @ 60 Hz | 115/208 a 230 |
