| Agency Compliance | CSA |
| Ambient (C) | 40 Degrees |
| Amps Holding | 0.22/0.11 |
| Application | Stops And Holds Rotating Loads On Conveyors, Crane Trolleys And High Speed Doors |
| Brake Mouting Position | Horizontal |
| Brand | Dayton |
| Coil Volts | 208-230/460V AC Or 174-190/380V AC, 208-230/460VAC Or 174-190/380VAC |
| Converts | Converts NEMA C-Face Motors And Gear Reducers To A Geared Brake Motor |
| Dia. (In.) | 6 7/8 in, 6-7/8 |
| Duty | Continuous |
| Enclosure | Waterproof/Dust-Tight |
| Features | Easily Installed |
| Finish | Gray Enamel Paint |
| For Use With | Single and Three Phase General Purpose C-Face Motors for Indoor/Outdoor Applications |
| Function | Spring Set Brake With Automatic Reset Release |
| Hz | 60/50 |
| Includes | Hardware |
| Inrush Amps | 1.74/0.87 |
| International Shipping | No |
| Item | Brake |
| Length (In.) | 4-7/8, 4.875 in |
| Lever Type | Manual Release |
| Max. HP @ 1725 RPM | 2 |
| Max. HP @ 3450 RPM | 3, 3 hp |
| Max. RPM | 3,450, 3,450 RPM |
| Mounts On | NEMA C-Face Flanges On Motors And Gear Reducers |
| Mpn | 2LYU5 |
| NEMA/IEC Frame | 56C/140TC |
| Outside Diameter | 6.88 in |
| Overall Length | 4.88 in |
| Phase | single |
| Power Lead Length (In.) | 15 |
| Series | 60 Series |
| Service Factor | 1.0 |
| Shaft Dia. (In.) | 5/8 |
| Shaft Dia. (In.), Shaft Diameter | 5/8 in |
| SKU | ZO-G0450606 |
| Static Torque (Ft.-Lb.) | 6 |
| SubCategory | Power Transmission |
| Type | Double C-Face Magnetic Disc |
| UPC | 190735222843 |
| Voltage @ 50 Hz | 174 a 190/380 |
| Voltage @ 60 Hz | 208 a 230/460 |