| Agency Compliance | CSA |
| Ambient (C) | 40 Degrees |
| Amps Holding | 0.22/0.11 |
| Application | Stops And Holds Rotating Loads On Conveyors, Crane Trolleys And High Speed Doors |
| Brake Mouting Position | Horizontal |
| Coil Volts | 208-230/460VAC Or 174-190/380VAC |
| Converts | Converts NEMA C-Face Motors And Gear Reducers To A Geared Brake Motor |
| Dia. (In.) | 6-7/8 |
| Duty | Continuous |
| Enclosure | Waterproof/Dust-Tight |
| Features | Easily Installed |
| Finish | Gray Enamel Paint |
| For Use With | Single And Three Phase General Purpose C-Face Motors For Indoor/Outdoor Applications |
| Function | Spring Set Brake With Automatic Reset Release |
| Hz | 60/50 |
| Includes | Hardware |
| Inrush Amps | 1.74/0.87 |
| Item | Brake |
| Length (In.) | 4-7/8 |
| Lever Type | Manual Release |
| Max. HP @ 1725 RPM | 2 |
| Max. HP @ 3450 RPM | 3 |
| Max. RPM | 3,450 |
| Mounts On | NEMA C-Face Flanges On Motors And Gear Reducers |
| NEMA/IEC Frame | 56C/140TC |
| Phase | Single |
| Power Lead Length (In.) | 15 |
| Series | 60 Series |
| Service Factor | 1.0 |
| Shaft Dia. (In.) | 5/8 |
| Static Torque (Ft.-Lb.) | 6 |
| Type | Double C-Face Magnetic Disc |
| Voltage @ 50 Hz | 174 a 190/380 |
| Voltage @ 60 Hz | 208 a 230/460 |