| Agency Compliance | c UL us |
| Amps | 8.3-7.6/3.8 |
| Application | Moderate Flow at Moderate Head Pressure |
| Bearing Type | Ball |
| Best Efficiency GPM @ Head | 80 gpm @ 60 ft, 80 gpm @ 60 ft. |
| Best Efficiency Range GPM @ Head | 48 to 106 gpm @ 80 to 30 ft |
| Brand | Dayton |
| Cord Length | Not Applicable |
| Current Stock, HP, Phase | 3 |
| Discharge Pipe Size, Intake Pipe Size | 1 1/2 in |
| Drain Plug | Easily Accessible |
| Duty | Continuous |
| GPM of Water @ 10 Ft. of Head | 123 |
| GPM of Water @ 15 Ft. of Head | 119 |
| GPM of Water @ 20 Ft. of Head | 115 |
| GPM of Water @ 25 Ft. of Head | 110 |
| GPM of Water @ 30 Ft. of Head | 106 |
| GPM of Water @ 40 Ft. of Head | 97 |
| GPM of Water @ 50 Ft. of Head | 86 |
| GPM of Water @ 60 Ft. of Head | 76 |
| GPM of Water @ 70 Ft. of Head | 63 |
| GPM of Water @ 80 Ft. of Head | 48 |
| Height | 7 1/2 in, 7-1/2" |
| Housing Material, Impeller Material, Volute Material | Polypropylene |
| HP | 3 hp |
| Hz | 60 |
| Impeller Type | Closed |
| Includes | Manual |
| Inlet Pressure | 75 PSI |
| Inlet, Outlet | 1-1/2" NPT |
| Inlet, Outlet | 1-1/2 in NPT |
| International Shipping | No |
| Item | Centrifugal Pump, Chemical Resistant Centrifugal Pump |
| Lead Time | Expected to ship in 1-2 business days |
| Length | 16-29/32", 16 29/32 in |
| Manufacturers Warranty Length | 1 yr., 1 yr |
| Max. Case Pressure | 100 PSI |
| Max. Dia. Solids | 1/4 in, 1/4" |
| Max. Fluid Viscosity | 100 SSU |
| Max. GPM @ Head | 123 gpm @ 10 ft., 123 gpm @ 10 ft |
| Max. Head | 95 ft, 86 ft. |
| Max. Liquid Temp. | 140 Degrees F |
| Max. Specific Gravity | 1.0 |
| Min. GPM @ Head | 48 gpm @ 80 ft. |
| Motor Enclosure, Motor Type | TEFC |
| Motor RPM | 3450 |
| Mpn | 2YEU5 |
| NEMA/IEC Frame | 56J |
| Overall Height | 7.5 in |
| Overall Length | 18.1 in |
| Overall Width | 10 in |
| Port Rotation | 4 Position |
| Prop 65 | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Screw Material, Shaft Material | Stainless Steel |
| Seal Material | Buna-N, Carbon, Ceramic, SS |
| Seal Type | Mechanical |
| Service Factor | 1.15 |
| Shaft Outer Diameter | 5/8 in |
| SKU | ZO-G2022377 |
| Solid Diameter (Maximum) | 0.25 in |
| SubCategory | Pumps |
| UPC | 190735238530 |
| Voltage | 208-230/460, 230/460 |
| Wetted Materials | Polypropylene, Buna-N, SS, Carbon, Ceramic |
| Width | 7 5/8 in, 7-5/8" |