| Agency Compliance | c UL us |
| Amps | 8.3-7.6/3.8 |
| Application | Moderate Flow at Moderate Head Pressure |
| Bearing Type | Ball |
| Best Efficiency GPM @ Head | 80 gpm @ 60 ft. |
| Best Efficiency Range GPM @ Head | 48 to 106 gpm @ 80 to 30 ft |
| Drain Plug | Easily Accessible |
| Duty | Continuous |
| GPM of Water @ 10 Ft. of Head | 123 |
| GPM of Water @ 15 Ft. of Head | 119 |
| GPM of Water @ 20 Ft. of Head | 115 |
| GPM of Water @ 25 Ft. of Head | 110 |
| GPM of Water @ 30 Ft. of Head | 106 |
| GPM of Water @ 40 Ft. of Head | 97 |
| GPM of Water @ 50 Ft. of Head | 86 |
| GPM of Water @ 60 Ft. of Head | 76 |
| GPM of Water @ 70 Ft. of Head | 63 |
| GPM of Water @ 80 Ft. of Head | 48 |
| Height | 7-1/2" |
| Housing Material, Impeller Material, Volute Material | Polypropylene |
| HP, Phase | 3 |
| Hz | 60 |
| Impeller Type | Closed |
| Includes | Manual |
| Inlet Pressure | 75 PSI |
| Inlet, Outlet | 1-1/2" NPT |
| Item | Centrifugal Pump |
| Length | 16-29/32" |
| Manufacturers Warranty Length | 1 yr. |
| Max. Case Pressure | 100 PSI |
| Max. Dia. Solids | 1/4" |
| Max. Fluid Viscosity | 100 SSU |
| Max. GPM @ Head | 123 gpm @ 10 ft. |
| Max. Head | 86 ft. |
| Max. Liquid Temp. | 140 Degrees F |
| Max. Specific Gravity | 1.0 |
| Min. GPM @ Head | 48 gpm @ 80 ft. |
| Motor Enclosure, Motor Type | TEFC |
| Motor RPM | 3450 |
| NEMA/IEC Frame | 56J |
| Port Rotation | 4 Position |
| Screw Material, Shaft Material | Stainless Steel |
| Seal Material | Buna-N, Carbon, Ceramic, SS |
| Seal Type | Mechanical |
| Service Factor | 1.15 |
| Voltage | 208-230/460 |
| Wetted Materials | Polypropylene, Buna-N, SS, Carbon, Ceramic |
| Width | 7-5/8" |