| Agency Compliance | c UL us |
| Amps | 2.5-2.4/1.2 |
| Application | Moderate Flow at Moderate Head Pressure |
| Bearing Type | Ball |
| Best Efficiency GPM @ Head | 24 gpm @ 41 ft. |
| Best Efficiency Range GPM @ Head | 18 to 33 gpm @ 50 to 20 ft |
| Drain Plug | Easily Accessible |
| Duty | Continuous |
| GPM of Water @ 10 Ft. of Head | 37 |
| GPM of Water @ 15 Ft. of Head | 35 |
| GPM of Water @ 20 Ft. of Head | 33 |
| GPM of Water @ 25 Ft. of Head | 31 |
| GPM of Water @ 30 Ft. of Head | 29 |
| GPM of Water @ 40 Ft. of Head | 24 |
| GPM of Water @ 50 Ft. of Head | 18 |
| GPM of Water @ 60 Ft. of Head | 10 |
| GPM of Water @ 70 Ft. of Head | 2 |
| Height | 7-1/2" |
| Housing Material, Impeller Material, Volute Material | Noryl |
| HP | 3/4 |
| Hz | 60 |
| Impeller Type | Closed |
| Includes | Manual |
| Inlet Pressure | 75 PSI |
| Inlet, Outlet | 1-1/2" NPT |
| Item | Centrifugal Pump |
| Length | 15-7/8" |
| Manufacturers Warranty Length | 1 yr. |
| Max. Case Pressure | 100 PSI |
| Max. Dia. Solids | 1/4" |
| Max. Fluid Viscosity | 100 SSU |
| Max. GPM @ Head | 37 gpm @ 10 ft. |
| Max. Head | 70 ft. |
| Max. Liquid Temp. | 180 Degrees F |
| Max. Specific Gravity | 1.0 |
| Min. GPM @ Head | 6 gpm @ 65 ft. |
| Motor Enclosure, Motor Type | TEFC |
| Motor RPM | 3450 |
| NEMA/IEC Frame | 56J |
| Phase | 3 |
| Port Rotation | 4 Position |
| Screw Material, Shaft Material | Stainless Steel |
| Seal Material | Viton, Noryl(TM), Carbon, Ceramic |
| Seal Type | Mechanical |
| Service Factor | 1.5 |
| Voltage | 208-230/460 |
| Wetted Materials | Noryl, SS, Viton, Carbon, Ceramic |
| Width | 7-5/8" |