| Agency Compliance | c UL us |
| Amps | 6.0-5.8/2.9 |
| Application | Moderate Flow at Moderate Head Pressure |
| Bearing Type | Ball |
| Best Efficiency GPM @ Head | 58 gpm @ 60 ft. |
| Best Efficiency Range GPM @ Head | 40 to 83 gpm @ 75 to 30 ft |
| Drain Plug | Easily Accessible |
| Duty | Continuous |
| GPM of Water @ 10 Ft. of Head | 96 |
| GPM of Water @ 15 Ft. of Head | 92 |
| GPM of Water @ 20 Ft. of Head | 89 |
| GPM of Water @ 25 Ft. of Head | 86 |
| GPM of Water @ 30 Ft. of Head | 83 |
| GPM of Water @ 40 Ft. of Head | 77 |
| GPM of Water @ 50 Ft. of Head | 68 |
| GPM of Water @ 60 Ft. of Head | 58 |
| GPM of Water @ 70 Ft. of Head | 47 |
| GPM of Water @ 80 Ft. of Head | 31 |
| Height | 7-1/2" |
| Housing Material, Impeller Material, Volute Material | Noryl |
| HP | 2 |
| Hz | 60 |
| Impeller Type | Closed |
| Includes | Manual |
| Inlet Pressure | 75 PSI |
| Inlet, Outlet | 1-1/2" NPT |
| Item | Centrifugal Pump |
| Length | 15-7/8" |
| Manufacturers Warranty Length | 1 yr. |
| Max. Case Pressure | 100 PSI |
| Max. Dia. Solids | 1/4" |
| Max. Fluid Viscosity | 100 SSU |
| Max. GPM @ Head | 96 gpm @ 10 ft. |
| Max. Head | 83 ft. |
| Max. Liquid Temp. | 180 Degrees F |
| Max. Specific Gravity | 1.0 |
| Min. GPM @ Head | 31 gpm @ 80 ft. |
| Motor Enclosure, Motor Type | TEFC |
| Motor RPM | 3450 |
| NEMA/IEC Frame | 56J |
| Phase | 3 |
| Port Rotation | 4 Position |
| Screw Material, Shaft Material | Stainless Steel |
| Seal Material | Viton, Noryl(TM), Carbon, Ceramic |
| Seal Type | Mechanical |
| Service Factor | 1.2 |
| Voltage | 208-230/460 |
| Wetted Materials | Noryl, SS, Viton, Carbon, Ceramic |
| Width | 7-5/8" |