| Agency Compliance | c UL us |
| Amps | 12.5 |
| Application | Aggressive Liquid Applications, and Other General Purpose Pumping, Booster Service, Irrigation, Jockey Pump Service, Moderate Flow at Moderate Head Pressure, Spraying Systems, Transfer of Non-Flammable Liquids, Water Circulation |
| Bearing Type | Ball |
| Best Efficiency GPM @ Head | 80 gpm @ 60 ft |
| Best Efficiency Range GPM @ Head | 48 to 106 gpm @ 80 to 30 ft |
| Country of Origin (subject to change) | India |
| Drain Plug | Yes |
| Duty | Continuous |
| GPM of Water @ 10 Ft. of Head | 123 |
| GPM of Water @ 15 Ft. of Head | 119 |
| GPM of Water @ 20 Ft. of Head | 115 |
| GPM of Water @ 25 Ft. of Head | 110 |
| GPM of Water @ 30 Ft. of Head | 106 |
| GPM of Water @ 40 Ft. of Head | 97 |
| GPM of Water @ 50 Ft. of Head | 86 |
| GPM of Water @ 60 Ft. of Head | 76 |
| GPM of Water @ 70 Ft. of Head | 63 |
| GPM of Water @ 80 Ft. of Head | 48 |
| Height | 7 1/2 in |
| Housing Material, Impeller Material, Volute Material | Noryl |
| HP | 3 hp |
| Hz | 60 |
| Impeller Type | Closed |
| Includes | Manual |
| Inlet Pressure | 75 psi |
| Inlet, Outlet | 1-1/2 in NPT |
| Item | Chemical Resistant Centrifugal Pump |
| Length, Length (Straight Wireway) | 15 7/8 in |
| Manufacturers Warranty Length | 1 yr |
| Max. Case Pressure | 100 psi |
| Max. Dia. Solids | 1/4 in |
| Max. Fluid Viscosity | 100 SUS |
| Max. GPM @ Head | 123 gpm @ 10 ft |
| Max. Head | 95 ft |
| Max. Liquid Temp. | 180 Degrees F |
| Max. Specific Gravity | 1.0 |
| Min. GPM @ Head | 48 gpm @ 80 ft |
| Motor Enclosure | TEFC |
| Motor RPM | 3,450 RPM |
| NEMA/IEC Frame | 56J |
| Phase, Service Factor | 1 |
| Port Rotation | None |
| Screw Material, Shaft Material | Stainless Steel |
| Seal Material | Carbon, Ceramic, Noryl(TM), Viton |
| Seal Type | Mechanical |
| Voltage | 230 |
| Wetted Materials | Carbon, Ceramic, Noryl, Viton |
| Width | 7 5/8 in |
