| Application | Printing Press, Conveyors, Pumps, Mixers |
| Bearings | Ball |
| Country of Origin (subject to change) | United States |
| Dimension A | 10.78" |
| Dimension AA | 6.72" |
| Dimension AB | 9" |
| Dimension B | 7.13" |
| Dimension BA | 1.5" |
| Dimension C | 9.38" |
| Dimension D, Dimension Z | 7-1/2" |
| Dimension D1 | 15.99" |
| Dimension D2, Dimension X | 3-3/4" |
| Dimension E | 3.22" |
| Dimension F | 3.62" |
| Dimension H | 2-1/4" |
| Dimension L | 6.06" |
| Dimension N | 3/4" |
| Dimension S | 1.38" |
| Dimension U | 3" |
| Enclosure | TEFC |
| Full Load Amps | 3.4-3.4/1.7 |
| Gear Case Material | Die Cast Aluminum |
| Gear Material | Hardened Steel/Forged Bronze |
| Gear Ratio | 47:1 |
| Gear Type | Worm |
| Gearmotor Brake Type, Thermal Protection | None |
| Gearmotor Enclosure | Totally Enclosed Fan-Cooled |
| Gearmotor Mounting Position | All Angle |
| Gearmotor Phase, Phase, Shaft Length (Dimension V) | 3 |
| Gearmotor Rotation | CW/CCW |
| Gearmotor Shaft Orientation, Shaft Orientation | Right Angle |
| Gearmotor Shaft Type | Single Left |
| Gearmotor Type, Item | AC Gearmotor |
| Gearmotor Voltage | 208-230/460 V AC |
| Gears | Hardened Steel Worm/Forged Bronze Output |
| Height (Dimension O) | 9.44" |
| Housing | Aluminum/Cast Iron |
| Hz | 60/50 |
| Input HP | 1 |
| Insulation Class | F |
| Keyway Size, Keyway Size Type | 1/4" x 1/8" x 1-1/4" |
| Lubrication | Gear Oil |
| Max. Ambient Temp. | 40 Degrees C |
| Max. Torque | 2.80 in.-lb. |
| Motor Type | 3-Phase |
| Mounting | All Position |
| Nameplate RPM | 37 |
| Overhung Load | 883 lb. |
| Rotation | Reversible |
| RPM Range | 31 to 50 |
| Seals | Oil Seals on Axle Shaft |
| Shaft | Single Output |
| Shaft Dia. (Dimension U) | 1-1/2" |
| Standards | UL Recognized/CSA |
| Starting Torque | 4325 in.-lb. |
| Voltage | 208-230/460 |
