- mpn5UWJ8
- brandname: Dayton
- manufacturername: Dayton
Attributes
| Key | Value |
|---|
| Agency Compliance | c UL us |
| Amps | 4.2/2.1 |
| Bearing Type | Ball |
| Best Efficiency GPM @ P. | 16 @ 78 |
| Best Efficiency Pressure | 78 psi |
| Booster Pump Type | Multi-Stage Booster Pump |
| Case Pressure (Maximum) | 245 psi |
| Compatible Discharge Pi. | 1 1/4 in |
| Compatible Intake Pipe . | 1 1/4 in |
| Compatible with Media T. | Non-Abrasive Liquids, W. |
| Country of Origin (subj. | India |
| Discharge Flange Size | 1 1/4 in |
| Discharge Type | Flange |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Flow Rate @ 100 psi | 5 gpm |
| Flow Rate @ 40 psi | 22 gpm |
| Flow Rate @ 50 psi | 21.5 gpm |
| Flow Rate @ 60 psi | 19 gpm |
| Flow Rate @ 70 psi | 17 gpm |
| Flow Rate @ 80 psi | 14 gpm |
| Flow Rate @ 90 psi | 10 gpm |
| For Use With Potable Sy. | No |
| For Use With Systems | Non-Potable |
| Frame | 56c |
| Frequency | 60 Hz |
| GPM @ 100 PSI | 5 |
| GPM @ 40 PSI | 22 |
| GPM @ 60 PSI | 19 |
| GPM @ 80 PSI | 14 |
| Height | 25 3/4 in |
| Horsepower | 1 1/2 hp |
| Housing Material | Cast Iron |
| Housing Material - Pumps | Cast Iron |
| HP | 1-1/2 |
| HP - Pumps | 1 1/2 hp |
| Hz | 60 |
| Impeller Design | Closed |
| Impeller Material | Stainless Steel |
| Impeller Type | Closed |
| Includes | Manual |
| Inlet | 1-1/4" FNPT |
| Inlet Size - Pumps | 1-1/4 in Flanged |
| Intake and Discharge Si. | 1 1/4 in , 1 1/4 in |
| Intake Size | 1 1/4 in |
| Intake Type | Flange |
| Item | Booster Pump |
| Length | 9 7/8 in |
| Length (Straight Wirewa. | 9 7/8 in |
| Manufacturer Warranty L. | 1 yr |
| Manufacturers Warranty . | 1 yr |
| Max. Case Pressure | 362 psi |
| Max. Dia. Solids | 5/64 in |
| Max. Liquid Temp. | 248 Degrees F |
| Max. Pressure | 108 psi |
| Max. Pressure - Pumps | 108 psi |
| Maximum Media Temperatu. | 248 Degrees F |
| Maximum RPM | 3,450 RPM |
| Motor Ambient Temp. Rat. | 40 Degrees C |
| Motor Ambient Temperatu. | 104 Degrees F |
| Motor Ambient Temperatu. | 40 Degrees F |
| Motor Enclosure | TEFC |
| Motor Enclosure - Pumps | Totally Enclosed Fan-Co. |
| Motor Enclosure Broad | TEFC |
| Motor Frame Designation | 56c |
| Motor RPM | 3,450 RPM |
| Motor Type | 3-Phase |
| Mounting Orientation | Vertical |
| Nameplate Voltage | 208-230/460V AC |
| Nominal Voltage | 208-230/460V AC |
| Number of Stages | 8 |
| Number of Stages - Pumps | 8 |
| Outlet | 1-1/4" FNPT |
| Outlet Size - Pumps | 1-1/4 in Flanged |
| Overall Height | 25.75 in |
| Overall Length | 9.88 in |
| Overall Width | 8.75 in |
| Phase | 3 |
| Phase - Pumps | 3 |
| Phase and Motor Enclosu. | Three Phase Totally Enc. |
| Phase and Pump Housing . | Three Phase Cast Iron |
| Phase Broad | 3 |
| Pump Housing Material | Cast Iron |
| Pump Housing Material a. | Cast Iron , Totally Enc. |
| Pump Mounting Position | Horizontal |
| Pumping Application | City Water Mains, Cooli. |
| Seal Material | EPDM, Silicon Carbide, . |
| Shut Off Pressure (Maxi. | 108 psi |
| Solid Diameter (Maximum) | 0.07 in |
| Stages | 8 |
| Standards | cULus Listed |
| Suction Lift | 0 ft |
| Suction Lift (Maximum) | 0 ft |
| Voltage | 208-230/460 |
| Voltage - Pumps | 208 to 240/480V AC |
| Wetted Material | Cast Iron, EPDM, Silico. |
| Wetted Materials | Cast Iron, EPDM, Silico. |
| Width | 8 3/4 in |