| Application | Conveyors, Packaging Equipment |
| Bearings | Heavy Duty Needle Roller and Thrust Balls on Case, Ball on Motor |
| Finish | Powder Coat Black |
| Full Load Amps | 3.80 A |
| Gear Case Material, Housing | Die Cast Aluminum |
| Gear Material | Hardened Steel |
| Gear Ratio | 28:1 |
| Gear Type | Helical First Stage/Subsequent Stages Spur/AGMA Class 9 |
| Gearmotor Brake Type, Thermal Protection | None |
| Gearmotor Enclosure | Totally Enclosed Fan-Cooled |
| Gearmotor Mounting Position | All Angle |
| Gearmotor Phase | 1 |
| Gearmotor Rotation | CW/CCW |
| Gearmotor Shaft Orientation | Parallel |
| Gearmotor Shaft Type | Single |
| Gearmotor Type, Item | AC Gearmotor |
| Gearmotor Voltage | 115 V AC |
| Gears | Hardened Steel, 1 St Stage Helical, Subsequent Stages Spur, AGMA Class 9 |
| Hz, Nameplate RPM | 60 |
| Input HP | 1/15 |
| Insulation Class | B |
| Keyway Size Type | 3/16" x 1" |
| Length Less Shaft | 9-7/8" |
| Lubrication | Permanent Heavy Duty Gear Oil |
| Max. Ambient Temp. | 40 Degrees C |
| Max. Torque | 150 in.-lb. |
| Motor Type | Split-phase |
| Number of Brake Discs Required | 2 |
| Overhung Load | 175 lbs. |
| Seals | Lip Type on Input and Output Shaft |
| Shaft Dia. (Dimension U) | 5/8" |
| Shaft Length (Dimension V) | 1.5" |
| Standards | UL |