| Bearings | Heavy Duty Ball, Needle Roller and Thrust Balls on Case, Ball on Motor |
| Full Load Amps | 5.50 |
| Gear Case Material, Housing | Die Cast Aluminum |
| Gear Material | Hardened Steel |
| Gear Ratio | 29:1 |
| Gear Type | Helical First Stage/Subsequent Stages Spur/AGMA Class 9 |
| Gearmotor Brake Type, Thermal Protection | None |
| Gearmotor Enclosure | Totally Enclosed Fan-Cooled |
| Gearmotor Mounting Position | All Angle |
| Gearmotor Phase | 1 |
| Gearmotor Rotation | CW/CCW |
| Gearmotor Shaft Orientation | Parallel |
| Gearmotor Shaft Type | Single |
| Gearmotor Type, Item | AC Gearmotor |
| Gearmotor Voltage | 115 V AC |
| Gears | Hardened Steel, 1st Stage Helical, Subsequent Stages Spur, AGMA Class 9 |
| Hz | 60 |
| Input HP | 1/3 |
| Length Less Shaft | 12-5/16" |
| Lubrication | Permanent Heavy Duty Gear Oil |
| Max. Ambient Temp. | 40 Degrees C |
| Max. Torque | 320 in.- lbs. |
| Motor Type | Split-phase |
| Nameplate RPM | 59 |
| Overhung Load | 325 lbs. |
| Seals | Lip Type on Input and Output Shaft |
| Shaft Dia. (Dimension U) | 3/4" |
| Shaft Length (Dimension V) | 1.5"_x000D_ |
| Standards | UL Recognized, CSA Certified |