Body Size | 1-1/2" |
Brand | Dixon Valve & Coupling |
Burst Pressure | 10000 PSI (700 bar) |
Connection | Female NPT |
Construction | Steel nipples are machined from high-strength steel and induction hardened. |
Data | 2-1/8" Hex Size |
Description: | 1-1/2 V PLUG, 1-1/2 F-NPTF STEEL, UNVALVED |
Features | General purpose hydraulic quick-connect provides superior flow characteristics with built-in reliability |
Hex | 2-1/8" |
Interchange | Interchangeable to MIL-C-51234; Snap-Tite H and Faster TNV |
Length | 2.44" (62.0mm), 2.44" |
Manufacturer, Supplier: | Dixon Valve & Coupling Co |
Material | Steel |
Max Temp (?F) | 250 |
Maximum OD | 2.33" (59.2mm) |
Maximum Operating Pressure | 5000 PSI (345 bar) |
MFG Part #:, MPN | V12F12-E |
Min. Temp (?F) | -40 |
Note | Minimum burst pressure ratings were established under laboratory conditions using a Static Burst Unit (SBU). For high impulse applications and to meet Det Norske Veritas (DNV) compliance, the burst pressure must be divided by four (4) to ensure a 4:1 safety factor during system operation. |
Product | Plugs |
Product Type | Simple product |
PSI | 5000 PSI |
PSI (Burst) | 10000 PSI |
Series | V-Series Snap-Tite H/IH |
Temperature Range | -40?F to +250?F (-40?C to +121?C) |
Thread | Female NPTF, NPTF |
Thread Size | 1-1/2" - 11-1/2 |
WARNING! | This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling. For more information go to www.P65Warnings.ca.gov |
Weight | 0.970000 |
Weight Lb | 0.9700 |