Dixon Valve 2JF1-B

<p><strong>Specifications </strong> </p> <ul><li>Rated pressure for connected Brass Coupler & Brass Plug: 300 PSI (20 bar) Maximum Working and 10,500 PSI (724 bar) Burst </li> <li>Rated pressure for connected Brass Coupler & Steel Plug: 500 PSI (35 bar) Maximum Working and 11,500 PSI (793 bar) Burst </li> </ul> <p><strong>Construction </strong> </p> <ul><li>Machined components are manufactured using solid bar stock </li> <li>Stainless steel balls, retaining rings and springs maximize corrosion resistance and extend service life </li> <li>Nitrile (Buna-N) seals are standard </li> <li>Steel componentry is plated using ROHS Compliant Trivalent Chrome </li> <li>Steel sleeve and steel tubular valve </li> </ul> <p><strong>Compatibility & Interchange Data </strong> </p> <ul><li>Truflate Automotive Interchange </li> <li>Parker 10 Series, Rectus 55KM and Tomco A2100/PT400 </li> </ul> <p><strong>Safety notes </strong> </p> <ul><li>It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure </li> <li>WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling </li> </ul>