Dixon Valve 2VM2-B-E

<p><strong>Dixon, 2VM2-B-E, V-Series 1/4" Brass Snap-Tite H/IH Interchange Unvalved Male Coupler 1/4" NPTF </strong> </p> <p><strong>Construction </strong> </p> <ul><li>Machined components are manufactured using solid bar stock </li> <li>Stainless steel balls, retaining rings and springs maximize corrosion resistance and extend service life </li> <li>Steel componentry is plated using ROHS Compliant Trivalent Chrome </li> <li>Steel coupler sleeves are hardened to resist deformation and maximize service life </li> <li>Nitrile (Buna-N) seals are standard </li> <li>All couplers incorporate a PTFE anti-extrusion ring to protect the seal components from dynamic impulse damage </li> </ul> <p><strong>Available Options </strong> </p> <ul><li>Contact Us for all available option adders </li> <li>Standard seal options include: FKM, EPDM, Steam-EP, FDA FKM, Mil-Nitrile, Fuel Nitrile and Silicone </li> <li>Kalrez? seal options include: 4079, 6375 and 7075 </li> <li>Valve options include: Unvalved, tubular, steel, brass and 316 stainless steel </li> <li>Sleeve options include: Sleeve-lock, Flanged and Silicone-flanged </li> <li>Oxy-clean treatment is available </li> </ul> <p><strong>Compatibility & Interchange Data </strong> </p> <ul><li>Interchangeable to MIL-C-51234 </li> <li>Snap-Tite H/IH and Faster TNV/TNL </li> </ul> <p><strong>Note </strong> </p> <ul><li>Minimum burst pressure ratings were established under laboratory conditions using a Static Burst Unit (SBU). For high impulse applications and to meet Det Norske Veritas (DNV) compliance, the burst pressure must be divided by four (4) to ensure a 4:1 safety factor during system operation </li> </ul> <p><strong>Safety notes </strong> </p> <ul><li>WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling </li> </ul>