Dixon Valve BV3BVLR-3001BCC

<p><strong>Dixon, BV3BVLR-3001BCC, Pneumatically Actuated 3-Way Brass Ball Valve </strong> </p> <p><strong>Features </strong> </p> <ul><li>Valve has a reduced port, a blow-out proof stem and a chrome-plated brass ball </li> <li>Valve has PTFE seats with O-ring backing for low operating torque and PTFE seats and double O-ring stem packing </li> <li>Rack and Pinion actuator has a hard anodized aluminum body, nickel plated anti-blowout pinion, Buna-N O-rings and NAMUR mounting. </li> <li>Actuator is tested to one million cycles and it features bi-directional stops for ?5? travel adjustment and visual position indication. </li> <li>80 PSI plant air is required </li> </ul> <p><strong>Note </strong> </p> <ul><li>A flow path needs to be selected at the time of order. Customer verification is critical. If flow path needs to be changed after being shipped labor and shipping charges will apply. </li> <li>For spring return actuators: must not fail position. </li> </ul> <p><strong>Safety notes </strong> </p> <ul><li>Even though there are torque safety factors built into our automated ball valve packages, actual service conditions must also be considered when selecting the proper product for the appropriate application. </li> <li>Severe service conditions such as dirty water, dirty air, all slurries, raw sewage water, oils, and other viscous fluids can have a dramatic affect in raising the torque requirements of ball valves as much as 75% and therefore larger actuators may be required. </li> <li>WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling. </li> </ul>