Dixon Valve L74M-4MBPX

<p><strong>Applications </strong> </p> <ul><li>Micro-fog lubricators, identified by a red adjusting screw, are used for applications containing one or more points of lubrication, cylinders and multiple or single tools. </li> </ul> <p><strong>Use </strong> </p> <ul><li>Designed for use with alcohol or other anti-freeze agents when units are installed in cold temperature environments. </li> <li>Recommended lubricants: misting type oil rated 50 to 200 SSU (ISO Grade 7 to 46) at 100?F </li> </ul> <p><strong>Features </strong> </p> <ul><li>Metal Bowl with Sight Glass </li> <li>7 oz. reservoir </li> <li>Quick release bayonet bowl </li> <li>Micro-fog design delivers aerosol mist </li> <li>High pressure dome with aluminum case and fluorocarbon O-Rings and seals; High pressure sight glass on bowls and metal petcock drain. </li> </ul> <p><strong>How it works </strong> </p> <ul><li>Air flow through the lubricator lifts oil from the reservoir to the sight-feed dome. Oil is dropped into the fog generator and atomized into a fine mist. Lightweight particles are delivered downstream for lubrication. Heavier particles fall back into the reservoir. </li> <li>The micro-fog lubricator delivers 10% of the oil drops visible through the transparent sight-feed dome. </li> </ul> <p><strong>Installation </strong> </p> <ul><li>In-line or modular installation </li> </ul> <p><strong>Safety notes </strong> </p> <ul><li>FRL's are designed for air service only, unless otherwise indicated. </li> <li>Micro-fog lubricators cannot be filled under pressure. </li> <li>Pressure rating given at ambient temperature 70?F. </li> <li>SCFM ratings at 90 PSIG inlet pressure </li> </ul>