mpn:
brand:
manufacturer:
MPN:
Description:
17QZ25R56 TIGEAR-2 E-Z KLEEN REDUCER
Attributes
| Key ^ | Value |
|---|---|
| Base to output center height | 1.9900 in, 50.546 mm |
| Case size | 17 |
| Center distance (in) | 1.7 in, Center distance (in):1.7500 in, 44.45 mm |
| Center to end of shaft distance | 4.3100 in, 109.474 mm |
| Finish | Silver-gray epoxy |
| Horsepower rating input | 0.8800 hp, 0.656 kW |
| Horsepower rating output | 0.6800 hp, 0.507 kW |
| Housing material | Cast iron |
| Input | 56C flange |
| Input flange | 56C |
| Input HP | 0.88 |
| Input style | Quill |
| Lubrication type | PAG, standard temperature |
| Motor compatibility | NEMA motor, 56C frame |
| Mounting bolt pattern length | 4.1900 in, 106.426 mm |
| Mounting bolt pattern width | 2.7500 in, 69.85 mm |
| Nominal ratio | 25 |
| Output | Right side solid output shaft |
| Output bore/shaft diameter | 0.875 in |
| Output horse power | 0.68 |
| Output shaft | Right (solid B) |
| Output shaft center to input motor mounting face distance | 4.9000 in, 124.46 mm |
| Output style | Right |
| Overhung load | 1190 lbf, 5293.384 N |
| Paint type | Stainless epoxy |
| Paint/coating | Green |
| Rated torque output | 609 in/lb, 609.0 in/lb |
| Ratio | 25 to 1 |
| Seal type | Two-piece harsh duty |
| Shaft diameter output | 0.8750 in, 22.225 mm |
| Shaft length output | 1.7400 in, 44.196 mm |
| Suitable for washdown | Yes |
| Thermal horsepower rating | 1.2800 hp, 0.954 kW |