| Base to output center height | 3.2500 in, 82.55 mm |
| Case size | 30 |
| Center distance (in) | 3 in, Center distance (in):3.0000 in, 76.2 mm |
| Center to end of shaft distance | 6.7500 in, 171.45 mm |
| Finish, Paint type | White epoxy |
| Gearbox component type | Gearbox |
| Horsepower rating input | 3.8100 hp, 2.841 kW |
| Horsepower rating output | 3.2600 hp, 2.431 kW |
| Housing material | Cast iron |
| Input | 180TC flange |
| Input flange | 180TC |
| Input HP | 3.81 |
| Input style | Quill |
| Lubrication type | PAG, standard temperature |
| Motor compatibility | NEMA motor, 180TC frame |
| Mounting bolt pattern length | 7.0000 in, 177.8 mm |
| Mounting bolt pattern width | 4.0000 in, 101.6 mm |
| Nominal ratio | 20 |
| Output | Double solid output shaft |
| Output bore/shaft diameter | 1.375 in |
| Output horse power | 3.26 |
| Output shaft center to input motor mounting face distance | 7.1400 in, 181.356 mm |
| Output style | Left, right |
| Overhung load | 2300 lbf, 10230.91 N |
| Paint/coating | White |
| Rated torque output | 2345 in/lb, 2345.0 in/lb |
| Ratio | 20 to 1 |
| Seal type | Two-piece harsh duty |
| Shaft diameter output | 1.3750 in, 34.925 mm |
| Shaft length output | 3.2000 in, 81.28 mm |
| Suitable for washdown | Yes |
| Thermal horsepower rating | 4.5200 hp, 3.371 kW |