Base to output center height | 3.9900 in, 101.346 mm |
Bore dia output | 1.9380 in, 49.225 mm |
Bore length | 8.7400 in, 221.996 mm |
Case size | 35 |
Center distance (in) | 3.5 in, Center distance (in):3.5000 in, 88.9 mm |
Finish, Paint type | White epoxy |
Gearbox component type | Gearbox |
Horsepower rating input | 12.2400 hp, 9.127 kW |
Horsepower rating output | 11.4600 hp, 8.546 kW |
Housing material | Cast iron |
Input | 180TC flange |
Input flange | 180TC |
Input HP | 12.24 |
Input style | 3-Piece coupled |
Lubrication type | PAG, standard temperature |
Motor compatibility | NEMA motor, 180TC frame |
Mounting bolt pattern length | 7.5000 in, 190.5 mm |
Mounting bolt pattern width | 4.0000 in, 101.6 mm |
Nominal ratio | 7 |
Output | Hollow bore |
Output bore/shaft diameter | 1.9375 in |
Output horse power | 11.46 |
Output shaft center to input motor mounting face distance | 11.1500 in, 283.21 mm |
Output style | Hollow |
Overhung load | 2430 lbf, 10809.179 N |
Paint/coating | White |
Rated torque output | 3054 in/lb, 3054.0 in/lb |
Ratio | 7 to 1 |
Seal type | Single-lip contact |
Suitable for washdown | No |
Thermal horsepower rating | 12.5200 hp, 9.336 kW |